Model-specific code library

Maytag oven Sensors codes

38 printed codes in this group: 1d11, 1d12, 1d21, 1d22, 3d11, 3d12, 3d21, 3d22, F01, F02 and 28 more.

Close view of a cold oven's rear wall with the slim temperature probe mounted on a small bracket, the racks removed and the door open below.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Sensors codes

1d11

The Maytag range entry for 1d11 names the oven temperature sensor, the control or the wiring. Reset first, then call us in if the code keeps coming back.

Reset, then book
1d12

Maytag's range page links 1d12 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

Reset, then book
1d21

Maytag lists the oven temperature sensor, the control or the wiring for 1d21 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.

Reset, then book
1d22

1d22 on your range is tied by Maytag to the oven temperature sensor, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.

Reset, then book
3d11

For 3d11, the Maytag range page points to the oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Reset, then book
3d12

3d12 on a range means Maytag suspects the oven temperature sensor, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.

Reset, then book
3d21

For 3d21, the Maytag range page points to the oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Reset, then book
3d22

For 3d22, the Maytag range page points to the oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Reset, then book
F01

Maytag lists the oven temperature sensor, the control or the wiring for F01 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.

Reset, then book
F02

Maytag's range page links F02 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

Reset, then book
F1

F1 on your range is tied by Maytag to the oven temperature sensor, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.

Reset, then book
F1-1

Maytag's page on F1-1 for the range says the suspects it lists are control, oven temperature sensor or wiring. To reset it, leave the circuit breaker off for 1 minute before switching it back on. A repeat of the code after the reset is the cue to schedule a visit with us.

Reset, then book
F1-2

Maytag's page on F1-2 for the range says the suspects it lists are oven temperature sensor, control or wiring. To reset it, leave the circuit breaker off for 1 minute before switching it back on. A repeat of the code after the reset is the cue to schedule a visit with us.

Reset, then book
F1-3

Maytag's range page links F1-3 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

Reset, then book
F1-H

Maytag lists the oven temperature sensor, the control or the wiring for F1-H on the range. Reset the power first and watch the display; a returning the code is the cue to book us.

Reset, then book
F1-L

F1-L on your range is tied by Maytag to the oven temperature sensor, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.

Reset, then book
F1E6

F1 E6 appears only on Maytag's wall oven pages, where it names the microwave thermistor or sensor, or the wiring. Maytag has no range page for it. Switch the breaker off for one minute and back on, then watch the oven; book a visit if F1 E6 returns.

Reset, then book
F2

F2 reads differently by product type: the pages for the range and wall oven state the possible trouble spots it lists are oven temperature sensor, control or wiring; the steam oven page offers a reset and nothing more. To reset it, leave the circuit breaker off for 1 minute before switching it back on.

Reset, then book
F3-1

F3-1 on a range means Maytag suspects the oven temperature sensor, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.

Reset, then book
F3E0

F3 E0 names the oven temperature sensor, the control or the wiring. On a wall oven Maytag says "Upper Oven Temperature Sensor", which tells a double oven which cavity to report. Switch the breaker off for one minute and back on, then book a visit if it returns.

Reset, then book
F3E1

F3 E1 names the oven temperature sensor, the control or the wiring. On a wall oven Maytag says "Lower Oven Temperature Sensor", which tells a double oven which cavity to report. Switch the breaker off for one minute and back on; book a visit if it returns.

Reset, then book
F3E2

Maytag's range page links F3E2 to the oven temperature sensor, the warming drawer sensor (if so equipped) or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

Reset, then book
F3E3

F3 E3 reads differently on the two trees. The range page names the oven temperature sensor or the wiring, with no control. The wall oven page adds the control. Switch the breaker off for one minute and back on, then book a visit if it returns.

Reset, then book
F3E4

F3 E4 is a probe code. On a range Maytag says verify the meat probe is seated in the receptacle. The wall oven page adds a second cause, a power attachment that came unplugged. Both then ask for the one-minute breaker reset.

Reset, then book

Let’s take care of it.

A full hamper waits for no one.
Book the repair.