What it means
1d22 on your range is tied by Maytag to the oven temperature sensor, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Maytag oven 1d22 / Sensors
1d22 on your range is tied by Maytag to the oven temperature sensor, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Also printed as 1d22
1d22 on your range is tied by Maytag to the oven temperature sensor, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
1d22 repeats after the reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record 1d22 character by character and note the product type: range.

Leave the breaker off a whole minute before checking for 1d22 again.

Run the oven briefly after the reset and see whether 1d22 comes back.

Keep foil, pans and racks clear of the sensor area inside the range.
Note the model and the moment 1d22 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
Read the definitionThe range list ties 1d22 to the oven temperature sensor, the control or the wiring. That is a set of candidates, and the page does not pick one.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether 1d22 comes back.
Read the supporting manualMaytag gives 1d21 and 1d22 the same wording on the range page, so the same first step fits both.
Read the supporting manualA sensor that misreads can mean wrong temperatures, so check food with a thermometer while the range is in use. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13706 / PH 13706 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14366 / PH 14366 (wall oven)
1d22 comes from Maytag Product Help (PH 13706) for the range, read in November 2026; the 1d22 entry names no models.
Maytag lists the oven temperature sensor, the control or the wiring. It is a possible-cause list, not a confirmed failure.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If 1d22 returns, schedule a visit.
Not from the code alone: the entry lists the oven temperature sensor, the control or the wiring and stops.
Model and serial numbers plus a note of what happened when 1d22 appeared.
Maytag codes, symptoms, parts and service
Maytag lists the oven temperature sensor, the control or the wiring for 1d21 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.