What it means
For 3d11, the Maytag range page points to the oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Maytag oven 3d11 / Sensors
For 3d11, the Maytag range page points to the oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Also printed as 3d11
For 3d11, the Maytag range page points to the oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
3d11 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record 3d11 character by character and note the product type: range.

Breaker off for one full minute, then back on, and look for 3d11.

Give the oven a minute on screen after the reset; a returning 3d11 means schedule a visit.

Watch whether the range reaches and holds the temperature you set; a sensor problem often shows up as food that cooks too fast or too slowly.
Write down the model and serial numbers and the exact 3d11 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
Read the definitionFor 3d11 the range entry names the oven temperature sensor, the control or the wiring. Nothing in it says which of them has failed.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether 3d11 comes back.
Read the supporting manual1d22 and 3d11 name the same suspects in the range list; quote the code you actually see when booking.
Read the supporting manualA sensor that misreads can mean wrong temperatures, so check food with a thermometer while the range is in use.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13707 / PH 13707 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14367 / PH 14367 (wall oven)
Scope for 3d11: Maytag range, PH 13707, checked November 2026. Maytag lists no models on the 3d11 page.
3d11 is printed against the oven temperature sensor, the control or the wiring; the page does not narrow it down.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If 3d11 returns, schedule a visit.
Not from the code alone: the entry lists the oven temperature sensor, the control or the wiring and stops.
Tell us the model, the display wording and when 3d11 first showed up.
Maytag codes, symptoms, parts and service
1d22 on your range is tied by Maytag to the oven temperature sensor, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.