What it means
3d12 on a range means Maytag suspects the oven temperature sensor, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Maytag oven 3d12 / Sensors
3d12 on a range means Maytag suspects the oven temperature sensor, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Also printed as 3d12
3d12 on a range means Maytag suspects the oven temperature sensor, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Turn the breaker off before you touch anything behind a panel.
3d12 returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Record 3d12 character by character and note the product type: range.

Cut power at the breaker for a minute, restore it, then check for 3d12.

Once power is back, keep an eye on the oven for about a minute for 3d12.

Keep foil, pans and racks clear of the sensor area inside the range.
Note the model and the moment 3d12 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
Read the definitionA range showing 3d12 is, per Maytag, dealing with a possible problem in the oven temperature sensor, the control or the wiring. The page adds no diagnosis.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if 3d12 stays away, the reset did its job.
Read the supporting manualMaytag gives 3d11 and 3d12 the same wording on the range page, so the same first step fits both.
Read the supporting manualA sensor that misreads can mean wrong temperatures, so check food with a thermometer while the range is in use.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13708 / PH 13708 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14368 / PH 14368 (wall oven)
3d12 comes from Maytag Product Help (PH 13708) for the range, read in November 2026; the 3d12 entry names no models.
Maytag lists the oven temperature sensor, the control or the wiring. It is a possible-cause list, not a confirmed failure.
It is the page's first step and costs nothing. A returning 3d12 afterward means schedule us.
Not from the code alone: the entry lists the oven temperature sensor, the control or the wiring and stops.
The model number, what 3d12 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
For 3d11, the Maytag range page points to the oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.