Before work starts
Your technician checks the washer, dryer or other appliance, then gives you the cost. The repair goes ahead only with your okay.
Independent appliance repair
We repair Maytag built-in wall ovens: single and double ovens that will not heat, a door that will not latch, an F code, or a steam oven message such as Descale is needed. Book a technician and we diagnose it with the power checked first.


A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.

A Maytag wall oven that will not heat or will not take commands is often locked, in Demo Mode, in Sabbath Mode, or showing a power-loss clock. Read the display for those first. When Press Cancel to Reset or Call Service appears, cancel and reset the power; should it return, book us for a visit.
F2 reads differently by product type: the pages for the range and wall oven state the possible trouble spots it lists are oven temperature sensor, control or wiring; the steam oven page offers a reset and nothing more. To reset it, leave the circuit breaker off for 1 minute before switching it back on.
Maytag's pages split on F3: the pages for the range and wall oven state the page names these possible trouble spots: oven control together with its wiring; the steam oven page offers a reset and nothing more. To reset it, leave the circuit breaker off for 1 minute before switching it back on.
Maytag's pages split on F5: the pages for the range and wall oven state the page names these possible trouble spots: door latch switches, oven door latch assembly or wiring; the steam oven page offers a reset and nothing more. To reset it, leave the circuit breaker off for 1 minute before switching it back on.
Maytag's page on F6 for the range and wall oven says the suspects it lists are oven control together with its wiring. To reset it, leave the circuit breaker off for 1 minute before switching it back on. A repeat of the code after the reset is the cue to schedule a visit with us.
F9 reads differently by product type: the wall oven page states the usual reason is a wiring mistake where the unit joins the home supply, at the supply itself or at the hard-wire joint; the steam oven page offers a reset and nothing more.
We pick the part after we read the model label and test the unit. Nothing is ordered ahead of time, and the quote is yours to approve before any work begins.

On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.

F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.

Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.

Maytag Product Help says F9 or F9 E0 on a wall oven will most often mean the oven is wired incorrectly at the home supply or the hard-wire connection, with L2 and N possibly swapped. A qualified electrician should check the supply. Line noise during an outage can also display F9, F9 E0 or PF.
Three steps from request to repair.
You stay in the loop the whole way.

Pick washer or dryer and tell us what it does: no spin, no heat, loud thumping. Book online any time.

The technician tests the machine and quotes the work. You approve the price before a tool comes out.

After the repair the technician runs the machine with you and explains what was changed.
F2, F3, F5, F6 and F9 each have a Product Help page. Steam ovens show shorter versions that are reset only.
Breaker off for 60 seconds, then on, then keep watching the oven for a minute.
On a wall oven, Product Help links F9 mainly to wrong wiring at the supply, possibly L2 and N swapped.
Line noise during an outage, or keys pressed in the first 10 seconds after power-up, can show F9, F9 E0 or PF.
Descale is needed and Empty and Refill Water Container are display messages that Product Help lists with steam oven pages.
F2, F3, F5 or F6 comes back once the breaker has been reset.
F9 shows on a new or moved wall oven.
The door will not latch or unlock.
The oven does not heat with no code showing.
Arrange a diagnosticYour technician checks the washer, dryer or other appliance, then gives you the cost. The repair goes ahead only with your okay.
Maytag deals with repairs its warranty covers. Every repair we complete is backed by our workmanship warranty.
Yes. This page covers built-in single and double wall ovens. Ranges, whether freestanding or slide-in, are covered on a separate page.
Maytag wall oven Product Help includes a steam oven section with F2, F3, F5, F8, F9 and F13 pages, so yes, book a visit.
Mostly wrong wiring where the oven meets the house supply, per Product Help. A qualified electrician should check it.
Reset the breaker for one minute and watch for a minute. If it returns, the latch assembly, its switches or the wiring needs testing.
For a unit still covered by the manufacturer's warranty, the maker takes that repair. After coverage ends, schedule a technician with us and approve the quote first.
Maytag codes, symptoms, parts and service
F2 reads differently by product type: the pages for the range and wall oven state the possible trouble spots it lists are oven temperature sensor, control or wiring; the steam oven page offers a reset and nothing more. To reset it, leave the circuit breaker off for 1 minute before switching it back on.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.