Inside the appliance
Oven door latch and latch switches (F5). In plain English.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.

Where it fits.
Oven door latch and latch switches (F5) in the appliance
Product Help names the latch assembly and its switches but does not locate them on your model.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Oven door latch and latch switches (F5) trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Confirm the code
The display shows F5. The same letter-number pairs F5E0 to F5E5 are separate codes with their own pages.
- 2
Cut power for a minute
Turn the breaker for the oven off for one minute, then on.
- 3
Monitor one minute
Leave the oven alone and see whether F5 displays again.
- 4
Verify operation
Start a normal setting. If the door latches and the oven runs, the reset worked.
Cleaning or replacement?
Leave internal testing to a technician.
F5 returns after the reset.
The door will not lock or unlock on its own.
The latch hook looks bent or the door does not close squarely.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Oven door latch and latch switches (F5) advice. Read the manual for your own model.
- F5 - Error Code - Range - Product Help | Maytag
- F5 - Wall Oven - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
Which Maytag oven problem does F5 point to?
The range and wall oven pages name the door latch assembly, its latch switches and the wiring.
Is F5 the same on a steam oven?
No. The steam oven F5 page gives only a one-minute breaker reset and names no part.
Should I force the door open?
The page offers only the reset. Do not force the door; reset power first, and schedule us if it stays stuck.
Will self-clean cause F5?
Product Help does not tie F5 to self-clean. We do not claim it, so describe when the code appeared when you book.
Maytag codes, symptoms, parts and service
From the message to what you do next.
Maytag oven F5 error code
Maytag's pages split on F5: the pages for the range and wall oven state the page names these possible trouble spots: door latch switches, oven door latch assembly or wiring; the steam oven page offers a reset and nothing more. To reset it, leave the circuit breaker off for 1 minute before switching it back on.
Maytag steam wall oven descale and water container messages
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Oven repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.


