What it means
Maytag lists the oven temperature sensor, the control or the wiring for 1d21 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Maytag oven 1d21 / Sensors
Maytag lists the oven temperature sensor, the control or the wiring for 1d21 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Also printed as 1d21
Maytag lists the oven temperature sensor, the control or the wiring for 1d21 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Turn the breaker off before you touch anything behind a panel.
1d21 repeats after the reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Match the label on your appliance to the range list before you rely on the wording for 1d21.

Breaker off for one full minute, then back on, and look for 1d21.

Give the oven a minute on screen after the reset; a returning 1d21 means schedule a visit.

Do not bend or poke the sensor inside the range; panel work belongs to a technician.
Keep the model number close and note when 1d21 appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
Read the definition1d21 is printed against the oven temperature sensor, the control or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether 1d21 comes back.
Read the supporting manual1d12 and 1d21 name the same suspects in the range list; quote the code you actually see when booking.
Read the supporting manualUse the range only for simple cooking you can watch, and stop if anything smells burnt.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13705 / PH 13705 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14365 / PH 14365 (wall oven)
1d21 comes from Maytag Product Help (PH 13705) for the range, read in November 2026; the 1d21 entry names no models.
Maytag lists the oven temperature sensor, the control or the wiring. It is a possible-cause list, not a confirmed failure.
Try it first: one minute off, one minute on screen. If 1d21 persists, a technician should look.
No. the oven temperature sensor, the control or the wiring are all candidates and the page gives no way to choose.
Model and serial numbers plus a note of what happened when 1d21 appeared.
Maytag codes, symptoms, parts and service
Maytag's range page links 1d12 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.