What it means
The Maytag range entry for 1d11 names the oven temperature sensor, the control or the wiring. Reset first, then call us in if the code keeps coming back.
Maytag oven 1d11 / Sensors
The Maytag range entry for 1d11 names the oven temperature sensor, the control or the wiring. Reset first, then call us in if the code keeps coming back.
Also printed as 1d11
The Maytag range entry for 1d11 names the oven temperature sensor, the control or the wiring. Reset first, then call us in if the code keeps coming back.
Turn the breaker off before you touch anything behind a panel.
1d11 returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Record 1d11 character by character and note the product type: range.

Leave the breaker off a whole minute before checking for 1d11 again.

Once power is back, keep an eye on the oven for about a minute for 1d11.

Do not bend or poke the sensor inside the range; panel work belongs to a technician.
Keep the model number close and note when 1d11 appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
Read the definitionThe range list ties 1d11 to the oven temperature sensor, the control or the wiring. That is a set of candidates, and the page does not pick one.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if 1d11 stays away, the reset did its job.
Read the supporting manualRead the exact display: 1c8c means the oven control or the wiring on the range page, and 1d11 means the oven temperature sensor, the control or the wiring.
Read the supporting manualA sensor that misreads can mean wrong temperatures, so check food with a thermometer while the range is in use.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13703 / PH 13703 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14363 / PH 14363 (wall oven)
Facts for 1d11 are from the range table (PH 13703) of Maytag Product Help, checked November 2026; no model list is printed.
Maytag lists the oven temperature sensor, the control or the wiring. It is a possible-cause list, not a confirmed failure.
It is the page's first step and costs nothing. A returning 1d11 afterward means schedule us.
Not from the code alone: the entry lists the oven temperature sensor, the control or the wiring and stops.
Model and serial numbers plus a note of what happened when 1d11 appeared.
Maytag codes, symptoms, parts and service
For 1c8c, the Maytag range page points to the oven control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.