What it means
1c82 on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Maytag oven 1c82 / Control board
1c82 on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Also printed as 1c82
1c82 on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Turn the breaker off before you touch anything behind a panel.
1c82 repeats after the reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Record 1c82 character by character and note the product type: range.

Cut power at the breaker for a minute, restore it, then check for 1c82.

Once power is back, keep an eye on the oven for about a minute for 1c82.

Note whether the display, keys and lights of the range behave normally, or whether other odd things happen near 1c82.
Keep the model number close and note when 1c82 appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionFor 1c82 the range entry names the oven control or the wiring. Nothing in it says which of them has failed.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether 1c82 returns.
Read the supporting manualMaytag gives 1c81 and 1c82 the same wording on the range page, so the same first step fits both.
Read the supporting manualIf the range behaves after the reset, using it is up to you; if 1c82 returns, stop and schedule a visit. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13701 / PH 13701 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14361 / PH 14361 (wall oven)
Facts for 1c82 are from the range table (PH 13701) of Maytag Product Help, checked November 2026; no model list is printed.
Maytag names the oven control or the wiring and gives no test to choose between them.
Yes, give it the whole minute. If 1c82 is still there afterward, schedule a visit.
The list is the oven control or the wiring; testing on site settles it.
The model number, what 1c82 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
1c81 on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.