What it means
For 1c8c, the Maytag range page points to the oven control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Maytag oven 1c8c / Control board
For 1c8c, the Maytag range page points to the oven control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Also printed as 1c8c
For 1c8c, the Maytag range page points to the oven control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
1c8c repeats after the reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record 1c8c character by character and note the product type: range.

Cut power at the breaker for a minute, restore it, then check for 1c8c.

Once power is back, keep an eye on the oven for about a minute for 1c8c.

The control board lives behind panels on the range; keep them closed.
Write down the model and serial numbers and the exact 1c8c wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionMaytag's range page says 1c8c may come from the oven control or the wiring. It stops there; no test and no ranking is given.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if 1c8c stays away, the reset did its job.
Read the supporting manual1c82 carries the same parts list as 1c8c on the range page. The reset is the same, only the code differs.
Read the supporting manualThe control runs everything on the range, so a returning 1c8c is a reason to stop using it. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13702 / PH 13702 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14362 / PH 14362 (wall oven)
Facts for 1c8c are from the range table (PH 13702) of Maytag Product Help, checked November 2026; no model list is printed.
The range page ties 1c8c to the oven control or the wiring without saying which has failed.
It is the page's first step and costs nothing. A returning 1c8c afterward means schedule us.
Maytag names the oven control or the wiring. Which one failed is for a technician with a meter to decide.
The model number, what 1c8c looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
1c82 on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.