What it means
1c81 on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Maytag oven 1c81 / Control board
1c81 on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Also printed as 1c81
1c81 on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
1c81 returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Match the label on your appliance to the range list before you rely on the wording for 1c81.

Leave the breaker off a whole minute before checking for 1c81 again.

Once power is back, keep an eye on the oven for about a minute for 1c81.

The control board lives behind panels on the range; keep them closed.
Note the model and the moment 1c81 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionMaytag's range page says 1c81 may come from the oven control or the wiring. It stops there; no test and no ranking is given.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether 1c81 comes back.
Read the supporting manualMaytag gives 1c7c and 1c81 the same wording on the range page, so the same first step fits both.
Read the supporting manualThe control runs everything on the range, so a returning 1c81 is a reason to stop using it. If the code keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13700 / PH 13700 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14360 / PH 14360 (wall oven)
Scope for 1c81: Maytag range, PH 13700, checked November 2026. Maytag lists no models on the 1c81 page.
1c81 is printed against the oven control or the wiring; the page does not narrow it down.
It is the page's first step and costs nothing. A returning 1c81 afterward means schedule us.
The list is the oven control or the wiring; testing on site settles it.
Tell us the model, the display wording and when 1c81 first showed up.
Maytag codes, symptoms, parts and service
1c7c on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.