What it means
Maytag's range page links 1c6c to the oven control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Maytag oven 1c6c / Control board
Maytag's range page links 1c6c to the oven control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Also printed as 1c6c
Maytag's range page links 1c6c to the oven control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
1c6c returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record 1c6c character by character and note the product type: range.

Breaker off for one full minute, then back on, and look for 1c6c.

Once power is back, keep an eye on the oven for about a minute for 1c6c.

Ask yourself whether a power cut, storm or cleaning cycle came just before 1c6c.
Write down the model and serial numbers and the exact 1c6c wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionThe range list ties 1c6c to the oven control or the wiring. That is a set of candidates, and the page does not pick one.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether 1c6c returns.
Read the supporting manual1c4c carries the same parts list as 1c6c on the range page. The reset is the same, only the code differs.
Read the supporting manualThe control runs everything on the range, so a returning 1c6c is a reason to stop using it. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13698 / PH 13698 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14358 / PH 14358 (wall oven)
Scope for 1c6c: Maytag range, PH 13698, checked November 2026. Maytag lists no models on the 1c6c page.
1c6c is printed against the oven control or the wiring; the page does not narrow it down.
It is the page's first step and costs nothing. A returning 1c6c afterward means schedule us.
The list is the oven control or the wiring; testing on site settles it.
The model number, what 1c6c looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
The Maytag range entry for 1c4c names the oven control or the wiring. Reset first, then call us in if the code keeps coming back.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.