What it means
The Maytag range entry for 1c4c names the oven control or the wiring. Reset first, then call us in if the code keeps coming back.
Maytag oven 1c4c / Control board
The Maytag range entry for 1c4c names the oven control or the wiring. Reset first, then call us in if the code keeps coming back.
Also printed as 1c4c
The Maytag range entry for 1c4c names the oven control or the wiring. Reset first, then call us in if the code keeps coming back.
Turn the breaker off before you touch anything behind a panel.
1c4c repeats after the reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Record 1c4c character by character and note the product type: range.

Cut power at the breaker for a minute, restore it, then check for 1c4c.

Once power is back, keep an eye on the oven for about a minute for 1c4c.

Ask yourself whether a power cut, storm or cleaning cycle came just before 1c4c.
Write down the model and serial numbers and the exact 1c4c wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definition1c4c is printed against the oven control or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if 1c4c stays away, the reset did its job.
Read the supporting manualMaytag gives 1c32 and 1c4c the same wording on the range page, so the same first step fits both.
Read the supporting manualIf the range behaves after the reset, using it is up to you; if 1c4c returns, stop and schedule a visit. If the code keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13697 / PH 13697 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14357 / PH 14357 (wall oven)
Scope for 1c4c: Maytag range, PH 13697, checked November 2026. Maytag lists no models on the 1c4c page.
1c4c is printed against the oven control or the wiring; the page does not narrow it down.
Try it first: one minute off, one minute on screen. If 1c4c persists, a technician should look.
The list is the oven control or the wiring; testing on site settles it.
The model number, what 1c4c looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
Maytag lists the oven control or the wiring for 1c32 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.