What it means
1c7c on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Maytag oven 1c7c / Control board
1c7c on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Also printed as 1c7c
1c7c on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
1c7c returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Check that your appliance is a range and copy 1c7c exactly as the display shows it.

Cut power at the breaker for a minute, restore it, then check for 1c7c.

Give the oven a minute on screen after the reset; a returning 1c7c means schedule a visit.

Note whether the display, keys and lights of the range behave normally, or whether other odd things happen near 1c7c.
Note the model and the moment 1c7c showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionThe range list ties 1c7c to the oven control or the wiring. That is a set of candidates, and the page does not pick one.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if 1c7c stays away, the reset did its job.
Read the supporting manualMaytag gives 1c6c and 1c7c the same wording on the range page, so the same first step fits both.
Read the supporting manualA control problem can stop heating or cause odd behavior, so stay near the range while it runs.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13699 / PH 13699 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14359 / PH 14359 (wall oven)
Facts for 1c7c are from the range table (PH 13699) of Maytag Product Help, checked November 2026; no model list is printed.
Maytag names the oven control or the wiring and gives no test to choose between them.
Try it first: one minute off, one minute on screen. If 1c7c persists, a technician should look.
No. the oven control or the wiring are all candidates and the page gives no way to choose.
The model and serial numbers, the exact display for 1c7c, and what the range was doing at the time.
Maytag codes, symptoms, parts and service
Maytag's range page links 1c6c to the oven control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.