What it means
Maytag's range page links 1d12 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Maytag oven 1d12 / Sensors
Maytag's range page links 1d12 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Also printed as 1d12
Maytag's range page links 1d12 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
1d12 returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Match the label on your appliance to the range list before you rely on the wording for 1d12.

Breaker off for one full minute, then back on, and look for 1d12.

Once power is back, keep an eye on the oven for about a minute for 1d12.

Watch whether the range reaches and holds the temperature you set; a sensor problem often shows up as food that cooks too fast or too slowly.
Note the model and the moment 1d12 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
Read the definitionMaytag's range page says 1d12 may come from the oven temperature sensor, the control or the wiring. It stops there; no test and no ranking is given.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether 1d12 returns.
Read the supporting manualMaytag gives 1d11 and 1d12 the same wording on the range page, so the same first step fits both.
Read the supporting manualUse the range only for simple cooking you can watch, and stop if anything smells burnt. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13704 / PH 13704 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14364 / PH 14364 (wall oven)
Scope for 1d12: Maytag range, PH 13704, checked November 2026. Maytag lists no models on the 1d12 page.
1d12 is printed against the oven temperature sensor, the control or the wiring; the page does not narrow it down.
It is the page's first step and costs nothing. A returning 1d12 afterward means schedule us.
Not from the code alone: the entry lists the oven temperature sensor, the control or the wiring and stops.
Model and serial numbers plus a note of what happened when 1d12 appeared.
Maytag codes, symptoms, parts and service
The Maytag range entry for 1d11 names the oven temperature sensor, the control or the wiring. Reset first, then call us in if the code keeps coming back.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.