What it means
Maytag lists the oven temperature sensor, the control or the wiring for F1-H on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Maytag oven F1-H / Sensors
Maytag lists the oven temperature sensor, the control or the wiring for F1-H on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Also printed as F1-H
Maytag lists the oven temperature sensor, the control or the wiring for F1-H on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
F1-H repeats after the reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record F1-H character by character and note the product type: range.

Breaker off for one full minute, then back on, and look for F1-H.

Once power is back, keep an eye on the oven for about a minute for F1-H.

Watch whether the range reaches and holds the temperature you set; a sensor problem often shows up as food that cooks too fast or too slowly.
Note the model and the moment F1-H showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
Read the definitionF1-H is printed against the oven temperature sensor, the control or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F1-H returns.
Read the supporting manualF13 is a separate entry from F1-H on the range page, with its own wording.
Read the supporting manualDo not rely on the dial alone while this is open; a food thermometer is the safer guide. If F1-H keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13755 / PH 13755 (range)
F1-H comes from Maytag Product Help (PH 13755) for the range, read in November 2026; the F1-H entry names no models.
The range page ties F1-H to the oven temperature sensor, the control or the wiring without saying which has failed.
Yes, give it the whole minute. If F1-H is still there afterward, schedule a visit.
Not from the code alone: the entry lists the oven temperature sensor, the control or the wiring and stops.
Model and serial numbers plus a note of what happened when F1-H appeared.
Maytag codes, symptoms, parts and service
Maytag's range page links F1-3 to the oven temperature sensor, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.