What it means
F1-L on your range is tied by Maytag to the oven temperature sensor, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Maytag oven F1-L / Sensors
F1-L on your range is tied by Maytag to the oven temperature sensor, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Also printed as F1-L
F1-L on your range is tied by Maytag to the oven temperature sensor, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
F1-L repeats after the reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Match the label on your appliance to the range list before you rely on the wording for F1-L.

Breaker off for one full minute, then back on, and look for F1-L.

Once power is back, keep an eye on the oven for about a minute for F1-L.

Watch whether the range reaches and holds the temperature you set; a sensor problem often shows up as food that cooks too fast or too slowly.
Keep the model number close and note when F1-L appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
Read the definitionThe range list ties F1-L to the oven temperature sensor, the control or the wiring. That is a set of candidates, and the page does not pick one.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F1-L stays away, the reset did its job.
Read the supporting manualF1-H carries the same parts list as F1-L on the range page. The reset is the same, only the code differs.
Read the supporting manualA sensor that misreads can mean wrong temperatures, so check food with a thermometer while the range is in use. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13756 / PH 13756 (range)
F1-L comes from Maytag Product Help (PH 13756) for the range, read in November 2026; the F1-L entry names no models.
Maytag names the oven temperature sensor, the control or the wiring and gives no test to choose between them.
Try it first: one minute off, one minute on screen. If F1-L persists, a technician should look.
The list is the oven temperature sensor, the control or the wiring; testing on site settles it.
Tell us the model, the display wording and when F1-L first showed up.
Maytag codes, symptoms, parts and service
Maytag lists the oven temperature sensor, the control or the wiring for F1-H on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.