F3 E1 names the oven temperature sensor, the control or the wiring. On a wall oven Maytag says "Lower Oven Temperature Sensor", which tells a double oven which cavity to report. Switch the breaker off for one minute and back on; book a visit if it returns.
F3 E1 names the oven temperature sensor, the control or the wiring. On a wall oven Maytag says "Lower Oven Temperature Sensor", which tells a double oven which cavity to report. Switch the breaker off for one minute and back on; book a visit if it returns.
F3 E1 - Error Code - Range - Product Help | Maytag
What Maytag oven F3E1 means.
What it means
F3 E1 names the oven temperature sensor, the control or the wiring. On a wall oven Maytag says "Lower Oven Temperature Sensor", which tells a double oven which cavity to report. Switch the breaker off for one minute and back on; book a visit if it returns.
What you can safely check
Turn the breaker off before you touch anything behind a panel.
When to call a technician
F3 E1 returns after the breaker reset.
Your Maytag to-do list, saved here on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Note which oven is affected
On a double wall oven the page points at the lower oven; the range page does not name a cavity.
Illustration. Follow your model’s instructions.
Check 2
Reset the breaker
Switch it off for one minute, then on, and watch the oven for one minute.
Illustration. Follow your model’s instructions.
Check 3
Compare with F3 E0
F3 E0 names the upper oven sensor on a wall oven, so report both if both showed.
Illustration. Follow your model’s instructions.
Check 4
Leave the sensor alone
It sits inside the cavity, so do not pry at it or its wiring.
Does F3E1 keep coming back?
Give us the model and the checks you have run, then open your request right here.
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Parts behind the message.
Component reference
Oven temperature sensor (F1-1, F1-2, F2)
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
The range page says there may be a problem with the Oven Temperature Sensor, the Control, or the associated wiring. It is the same sentence as F3 E0 on the range.
It names the Lower Oven Temperature Sensor, the Control, or the wiring. That is the only difference from the range wording, and it tells you which cavity to describe.
Reset the power at the breaker for one minute and watch the oven. If F3 E1 returns, book a visit; the page lists three possible problems and no owner fix.