F3 E0 names the oven temperature sensor, the control or the wiring. On a wall oven Maytag says "Upper Oven Temperature Sensor", which tells a double oven which cavity to report. Switch the breaker off for one minute and back on, then book a visit if it returns.
F3 E0 names the oven temperature sensor, the control or the wiring. On a wall oven Maytag says "Upper Oven Temperature Sensor", which tells a double oven which cavity to report. Switch the breaker off for one minute and back on, then book a visit if it returns.
F3 E0 - Error Code - Range - Product Help | Maytag
What Maytag oven F3E0 means.
What it means
F3 E0 names the oven temperature sensor, the control or the wiring. On a wall oven Maytag says "Upper Oven Temperature Sensor", which tells a double oven which cavity to report. Switch the breaker off for one minute and back on, then book a visit if it returns.
What you can safely check
Turn the breaker off before you touch anything behind a panel.
When to call a technician
F3 E0 returns after the breaker reset.
Your Maytag to-do list, saved here on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Note which oven is affected
On a double wall oven the page points at the upper oven. A range page says only "Oven Temperature Sensor".
Illustration. Follow your model’s instructions.
Check 2
Reset the breaker
Switch it off for one minute, then on, and watch the oven for one minute.
Illustration. Follow your model’s instructions.
Check 3
Check the lower oven too
If F3 E1 also appeared, tell us; on a wall oven it names the lower oven sensor.
Illustration. Follow your model’s instructions.
Check 4
Leave the sensor alone
The sensor sits inside the oven cavity, so do not pry at it or the wiring.
Does F3E0 keep coming back?
Give us the model and the checks you have run, then open your request right here.
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Parts behind the message.
Component reference
Oven temperature sensor (F1-1, F1-2, F2)
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
The range page says there may be a problem with the Oven Temperature Sensor, the Control, or the associated wiring. It does not say which of the three is the cause.
The wall oven page uses the same three suspects but names the sensor as the Upper Oven Temperature Sensor. That is the detail to give us if you have two ovens.
F3 E1 and F3 E5 to F3 E9 name the Lower Oven Temperature Sensor on the wall oven tree, so the upper and lower cavities are reported under different codes.
Reset the power at the breaker for one minute and watch the oven. If F3 E0 returns, book a visit; Maytag lists the sensor, the control and the wiring and gives no owner repair.