Model-specific code library

Maytag oven Sensors codes, F3E5 to Probe or Insert Probe

38 printed codes in this group: F3E5, F3E6, F3E7, F3E8, F3E9, F4E1, F4E2, F4E3, F4E4, F4E5 and 4 more.

Close view of a cold oven's rear wall with the slim temperature probe mounted on a small bracket, the racks removed and the door open below.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Sensors codes

F3E5

For F3E5, the Maytag wall oven page points to the lower oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Reset, then book
F3E6

F3E6 on a wall oven means Maytag suspects the lower oven temperature sensor, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.

Reset, then book
F3E7

F3E7 on your wall oven is tied by Maytag to the lower oven temperature sensor, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.

Reset, then book
F3E8

For F3E8, the Maytag wall oven page points to the lower oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Reset, then book
F3E9

F3E9 on a wall oven means Maytag suspects the lower oven temperature sensor, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.

Reset, then book
F4E1

F4E1 on a wall oven means Maytag suspects the thermistor, the appliance manager or the wiring. Begin with the reset; if the code is back afterward, book a technician.

Reset, then book
F4E2

F4 E2 names the microwave sensor/thermistor, the microwave appliance manager, or the wiring. It is a combination wall oven entry; there is no range page. Do the one-minute breaker reset and tell us whether a microwave cycle starts.

Reset, then book
F4E3

The Maytag wall oven entry for F4E3 names the microwave exhaust air temperature sensor or the wiring. Reset first, then call us in if the code keeps coming back.

Reset, then book
F4E4

The Maytag wall oven entry for F4E4 names the microwave humidity sensor, the microwave appliance manager or the wiring. Reset first, then call us in if the code keeps coming back.

Reset, then book
F4E5

F4 E5 names the microwave weight sensor or its wiring, and appears only on Maytag's wall oven pages. Switch the breaker off for one minute and back on, then tell us what the microwave was doing; book a visit if it returns.

Reset, then book
F4E6

F4 E6 names the microwave wave guide temperature sensor or its wiring, on the wall oven tree only. Switch the breaker off for one minute and back on, and tell us when the code appeared; book a visit if it returns.

Reset, then book
F4E7

Maytag's wall oven page links F4E7 to the microwave meat probe, the meat probe receptacle or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

Reset, then book
F7E4

F7 E4 names the water conductivity sensor or the wiring, on Maytag's wall oven pages only. Switch the breaker off for one minute and back on, and watch the oven. If F7 E4 comes back, book a visit; the page names the part but gives no owner fix.

Reset, then book
Probe or Insert Probe

On a range, the entry for Probe or Insert Probe says “The Control is 'looking' for an input from the Meat Probe.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Information only

Let’s take care of it.

A full hamper waits for no one.
Book the repair.