What it means
The Maytag wall oven entry for F4E3 names the microwave exhaust air temperature sensor or the wiring. Reset first, then call us in if the code keeps coming back.
Maytag oven F4E3 / Sensors
The Maytag wall oven entry for F4E3 names the microwave exhaust air temperature sensor or the wiring. Reset first, then call us in if the code keeps coming back.
Also printed as F4E3
The Maytag wall oven entry for F4E3 names the microwave exhaust air temperature sensor or the wiring. Reset first, then call us in if the code keeps coming back.
Turn the breaker off before you touch anything behind a panel.
F4E3 returns, or the wall oven behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Match the label on your appliance to the wall oven list before you rely on the wording for F4E3.

Leave the breaker off a whole minute before checking for F4E3 again.

Give the oven a minute on screen after the reset; a returning F4E3 means schedule a visit.

Do not bend or poke the sensor inside the wall oven; panel work belongs to a technician.
Keep the model number close and note when F4E3 appeared and what the wall oven was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit


A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Maytag's wall oven page says F4E3 may come from the microwave exhaust air temperature sensor or the wiring. It stops there; no test and no ranking is given.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F4E3 returns.
Read the supporting manualF4E2 sits beside F4E3 on the wall oven page and names the microwave sensor/thermistor, the microwave appliance manager or the wiring; the code names the microwave exhaust air temperature sensor or the wiring.
Read the supporting manualDo not rely on the dial alone while this is open; a food thermometer is the safer guide. Never open a panel on the wall oven yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14441 / PH 14441 (wall oven)
Facts for F4E3 are from the wall oven table (PH 14441) of Maytag Product Help, checked November 2026; no model list is printed.
F4E3 is printed against the microwave exhaust air temperature sensor or the wiring; the page does not narrow it down.
Yes, give it the whole minute. If F4E3 is still there afterward, schedule a visit.
Maytag names the microwave exhaust air temperature sensor or the wiring. Which one failed is for a technician with a meter to decide.
Model and serial numbers plus a note of what happened when F4E3 appeared.
Maytag codes, symptoms, parts and service
F4 E2 names the microwave sensor/thermistor, the microwave appliance manager, or the wiring. It is a combination wall oven entry; there is no range page. Do the one-minute breaker reset and tell us whether a microwave cycle starts.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.