What it means
For F3E5, the Maytag wall oven page points to the lower oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Maytag oven F3E5 / Sensors
For F3E5, the Maytag wall oven page points to the lower oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Also printed as F3E5
For F3E5, the Maytag wall oven page points to the lower oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Turn the breaker off before you touch anything behind a panel.
F3E5 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Check that your appliance is a wall oven and copy F3E5 exactly as the display shows it.

Breaker off for one full minute, then back on, and look for F3E5.

Once power is back, keep an eye on the oven for about a minute for F3E5.

Keep foil, pans and racks clear of the sensor area inside the wall oven.
Note the model and the moment F3E5 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
Read the definitionFor F3E5 the wall oven entry names the lower oven temperature sensor, the control or the wiring. Nothing in it says which of them has failed.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F3E5 stays away, the reset did its job.
Read the supporting manualF3E4 is a neighbor of F3E5, not a synonym. The reset may overlap; the text does not.
Read the supporting manualUse the wall oven only for simple cooking you can watch, and stop if anything smells burnt. Never open a panel on the wall oven yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14431 / PH 14431 (wall oven)
F3E5 comes from Maytag Product Help (PH 14431) for the wall oven, read in November 2026; the F3E5 entry names no models.
Maytag names the lower oven temperature sensor, the control or the wiring and gives no test to choose between them.
Yes, give it the whole minute. If F3E5 is still there afterward, schedule a visit.
No. the lower oven temperature sensor, the control or the wiring are all candidates and the page gives no way to choose.
The model and serial numbers, the exact display for F3E5, and what the wall oven was doing at the time.
Maytag codes, symptoms, parts and service
F3 E4 is a probe code. On a range Maytag says verify the meat probe is seated in the receptacle. The wall oven page adds a second cause, a power attachment that came unplugged. Both then ask for the one-minute breaker reset.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.