Maytag oven F3E3 / Sensors

Maytag oven
error code F3E3

Oven / display reference

F3 E3 reads differently on the two trees. The range page names the oven temperature sensor or the wiring, with no control. The wall oven page adds the control. Switch the breaker off for one minute and back on, then book a visit if it returns.

Also printed as F3E3

Last reviewed

Oven / display reference
Meaning
F3 E3 reads differently on the two trees. The range page names the oven temperature sensor or the wiring, with no control. The wall oven page adds the control. Switch the breaker off for one minute and back on, then book a visit if it returns.
Who handles it
Reset, then book
Related codes
Source
F3 E3 - Error Code - Range - Product Help | Maytag

What Maytag oven F3E3 means.

What it means

F3 E3 reads differently on the two trees. The range page names the oven temperature sensor or the wiring, with no control. The wall oven page adds the control. Switch the breaker off for one minute and back on, then book a visit if it returns.

What you can safely check

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

When to call a technician

F3 E3 returns after the breaker reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 4 checks done
  1. Maytag oven F3E3: Close view of a cold oven's rear wall with the slim temperature probe mounted on a small bracket, the racks removed and the door open below.
    Illustration. Follow your model’s instructions.
    Before you begin

    Check which page applies

    The control is a named suspect only on the wall oven page.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Reset the breaker

    Switch it off for one minute, then on, and watch the oven for one minute.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Compare with F3 E2

    On a range, F3 E2 adds a warming drawer sensor "if so equipped"; mention a warming drawer when you book.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Write down the display

    Note the exact wording on the display and which oven was in use.

Does F3E3 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The oven temperature sensor.

Conceptual Range / oven sectionTemperature sensorWiringControl123

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Open range oven with two racks and a thin metal temperature probe with a braided lead mounted on the rear wall

Component reference

Oven temperature sensor (F1-1, F1-2, F2)

On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.

Read the definition

A little more context.

What does the range page say about F3 E3?

There may be a problem with the Oven Temperature Sensor, or the associated wiring. The control is not listed, unlike the neighboring range entries.

Read the supporting manual

What does the wall oven page say?

It lists the Oven Temperature Sensor, the Control, or the associated wiring, so on a wall oven the control is a suspect as well.

Read the supporting manual

How does that compare with F3 E0 to F3 E2?

F3 E0, F3 E1 and F3 E2 on the range all name the control or a second part. F3 E3 is the one range entry that stops at the sensor and the wiring.

Read the supporting manual

What should I do when F3 E3 shows?

Reset the power at the breaker for one minute and watch the oven. If F3 E3 returns, book a visit; the sensor and its wiring are tested on site.

Read the supporting manual

The manual behind the message.

Manufacturer document

F3 E3 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13777 / PH 13777 (range)

Manufacturer document

F3 E3 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14429 / PH 14429 (wall oven)

Manufacturer document

F3 E0 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13774 / PH 13774 (range)

Manufacturer document

F3 E1 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13775 / PH 13775 (range)

Manufacturer document

F3 E2 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13776 / PH 13776 (range)

Product Help range page PH 13777 and wall oven page PH 14429, with PH 13774 to 13776 for the neighboring range entries. The pages list no models.

Here to help

Good questions.
Clear answers.

Talk to our team
Is F3 E3 only a sensor problem on a range?

The range page names the sensor or the wiring and does not mention the control. Maytag does not say why it differs from F3 E0 to F3 E2.

Why does the wall oven page include the control?

Maytag does not explain. We show both pages as printed and use the one that matches your oven type.

What does the warming drawer sensor have to do with this?

Only F3 E2 on a range mentions it, "if so equipped". F3 E3 does not name a warming drawer sensor.

Will the breaker reset fix F3 E3?

It may clear a one-time glitch, and Maytag asks you to watch the oven for a minute afterward. If the code returns, a technician needs to test the sensor.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.