Model-specific code library

Maytag oven Fan and airflow codes

13 printed codes in this group: 4d21, 4d22, 4d41, 4d42, Cooling Fan Speed, F7E5, F7E6, F8E0, F8E1, F8E2 and 3 more.

A hand held near the cooling vent slots above a range oven door, a beige quilted oven mitt hanging on the stainless handle.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Fan and airflow codes

4d21

For 4d21, the Maytag range page points to the airflow restriction, the oven cooling fan or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Reset, then book
4d22

4D22 means the cooling fan speed is too low. Maytag names three suspects: an airflow restriction, the oven cooling fan, or the wiring. Check that nothing blocks the vents, then reset the power for one minute.

Reset, then book
4d41

4d41 on a range means Maytag suspects the airflow restriction, the oven cooling fan or the wiring. Begin with the reset; if the code is back afterward, book a technician.

Reset, then book
4d42

4D42 means the cooling fan speed is too high. Maytag lists an airflow restriction, the oven cooling fan or the wiring as possible problems. Clear the vents, then reset the power for one minute and watch the oven for one more.

Reset, then book
Cooling Fan Speed

Maytag lists the airflow restriction, the oven cooling fan or the wiring for Cooling Fan Speed on the range. Reset the power first and watch the display; a returning the code is the cue to book us.

Reset, then book
F7E5

F7E5 on your range is tied by Maytag to the cooling fan or the wiring. One reset costs nothing; if the code survives it, schedule a visit.

Reset, then book
F7E6

The Maytag range entry for F7E6 names the cooling fan or the wiring. Reset first, then call us in if the code keeps coming back.

Reset, then book
F8E0

On a range, F8 E0 means the cooling fan speed is too low: Maytag lists an airflow restriction, the oven cooling fan or the wiring. On a double wall oven the page names the Upper Oven Cooling Fan. Clear the airflow, then reset the breaker.

Reset, then book
F8E1

Maytag lists the airflow restriction, the lower oven cooling fan or the wiring for F8E1 on the wall oven. Reset the power first and watch the display; a returning the code is the cue to book us.

Reset, then book
F8E2

On a range, F8 E2 means the cooling fan speed is too high. Maytag lists the oven cooling fan or the wiring, with no airflow restriction. The wall oven page drops the "too high" label. Reset the breaker for one minute and watch the oven.

Reset, then book
F8E3

The Maytag wall oven entry for F8E3 names the oven cooling fan or the wiring. Reset first, then call us in if the code keeps coming back.

Reset, then book
F8E4

Maytag's wall oven page links F8E4 to the exhaust fan air temperature sensor or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

Reset, then book
F8E5

For F8E5, the Maytag wall oven page points to the exhaust fan air temperature sensor or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Reset, then book

Let’s take care of it.

A full hamper waits for no one.
Book the repair.