What it means
4D42 means the cooling fan speed is too high. Maytag lists an airflow restriction, the oven cooling fan or the wiring as possible problems. Clear the vents, then reset the power for one minute and watch the oven for one more.
Maytag oven 4d42 / Fan and airflow
4D42 means the cooling fan speed is too high. Maytag lists an airflow restriction, the oven cooling fan or the wiring as possible problems. Clear the vents, then reset the power for one minute and watch the oven for one more.
Also printed as 4d42
4D42 means the cooling fan speed is too high. Maytag lists an airflow restriction, the oven cooling fan or the wiring as possible problems. Clear the vents, then reset the power for one minute and watch the oven for one more.
Turn the breaker off before you touch anything behind a panel.
4D42 returns after the reset.
Your Maytag to-do list, saved here on this device

Look for anything blocking the oven's airflow. Maytag lists an airflow restriction on this "too high" page too.

Off one minute, on, and monitor the oven for one minute.

During preheat, mid-bake or after a cycle: tell us at booking.

Range code F8 E2 is also "too high," but its page does not mention an airflow restriction.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
A Maytag range carries a cooling fan whose job is to protect the oven cavity and electronics from heat during BAKE, BROIL and CLEAN.
Read the definitionCooling fan speed too high. There may be a problem with an airflow restriction, the oven cooling fan, or the associated wiring.
Read the supporting manualMaytag does not explain. The same three suspects appear on the "too low" page, so the page does not tell the two apart.
Read the supporting manualOn the range F8 E2 page the "too high" entry lists only the cooling fan and the wiring. 4D42 adds the airflow restriction.
Read the supporting manualAfter the reset, a code that returns means the fan or its wiring needs testing; book a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13722 / PH 13722 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14382 / PH 14382 (wall oven)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13797 / PH 13797 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13718 / PH 13718 (range)
Product Help range page PH 13722 and wall oven page PH 14382, with the 4D41 page PH 13721, the Cooling Fan Speed message PH 13889 and the F8 E2 page PH 13797 for the comparison.
Maytag does not rank them.
Maytag lists an airflow restriction without naming dust.
It says "too low or too high" and lists the same suspects.
A neighbor page with "too high" wording; 4D42 is the entry for this record.
Maytag codes, symptoms, parts and service
4d41 on a range means Maytag suspects the airflow restriction, the oven cooling fan or the wiring. Begin with the reset; if the code is back afterward, book a technician.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
A Maytag range carries a cooling fan whose job is to protect the oven cavity and electronics from heat during BAKE, BROIL and CLEAN. Product Help says it can keep spinning for a long while after the oven goes off. A Cooling Fan Speed message means its speed is off.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.