Maytag oven 4d51 / Door and lid

Maytag oven
error code 4d51

Oven / display reference4d51

For 4d51, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Also printed as 4d51

Last reviewed

Oven / display reference4d51
Meaning
For 4d51, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Who handles it
Reset, then book
Related codes
Source
4d51 - Error Code - Range - Product Help | Maytag

What Maytag oven 4d51 means.

What it means

For 4d51, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

4d51 repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven 4d51: Cold open wall oven showing the motorized door latch lever, hook and switch behind the top trim, with the power plug lying unplugged on the floor nearby
    Illustration. Follow your model’s instructions.
    Before you begin

    Before you start

    Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Record 4d51 character by character and note the product type: range.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    Cut power at the breaker for a minute, restore it, then check for 4d51.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Run the oven briefly after the reset and see whether 4d51 comes back.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Never force a locked door on the range. A latch that will not release is a job for a visit.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Note the model

    Write down the model and serial numbers and the exact 4d51 wording before you call.

Does 4d51 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The door lock.

Conceptual Range / oven sectionDoorLock motor / latchControl123
  1. 1Door

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Close view of a metal oven door latch hook mounted with two screws beside the open oven cavity

Component reference

Oven door latch and latch switches (F5)

F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.

Read the definition

A little more context.

What lies behind 4d51 on a Maytag range?

4d51 is printed against the oven door latch assembly, the door switch or the wiring. Maytag words it as a possible problem, not a finding.

Read the supporting manual

What do I try at home first for 4d51?

Maytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether 4d51 returns.

Read the supporting manual

Why do 4d51 and 4d42 sit side by side in Maytag's list?

Read the exact display: 4d42 means the airflow restriction, the oven cooling fan or the wiring on the range page, and 4d51 means the oven door latch assembly, the door switch or the wiring.

Read the supporting manual

Do I switch the range off when 4d51 comes up?

A latch problem concerns the door and not the heat, so cook normally and keep cleaning cycles off. Never open a panel on the range yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

4d51 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13723 / PH 13723 (range)

Manufacturer document

4d51 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14383 / PH 14383 (wall oven)

Facts for 4d51 are from the range table (PH 13723) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read 4d51 on my range?

The range page ties 4d51 to the oven door latch assembly, the door switch or the wiring without saying which has failed.

Is switching off the breaker enough for 4d51?

It is the page's first step and costs nothing. A returning 4d51 afterward means schedule us.

Does 4d51 point to a single part?

Maytag names the oven door latch assembly, the door switch or the wiring. Which one failed is for a technician with a meter to decide.

What helps most on the first visit for 4d51?

Model and serial numbers plus a note of what happened when 4d51 appeared.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.