What it means
For 4d52, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Maytag oven 4d52 / Door and lid
For 4d52, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Also printed as 4d52
For 4d52, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
4d52 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Check that your appliance is a range and copy 4d52 exactly as the display shows it.

Cut power at the breaker for a minute, restore it, then check for 4d52.

Give the oven a minute on screen after the reset; a returning 4d52 means schedule a visit.

Never force a locked door on the range. A latch that will not release is a job for a visit.
Write down the model and serial numbers and the exact 4d52 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definitionFor 4d52 the range entry names the oven door latch assembly, the door switch or the wiring. Nothing in it says which of them has failed.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether 4d52 comes back.
Read the supporting manual4d51 and 4d52 name the same suspects in the range list; quote the code you actually see when booking.
Read the supporting manualEveryday cooking can go on if the door closes fully, but avoid any cleaning cycle. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13724 / PH 13724 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14384 / PH 14384 (wall oven)
Facts for 4d52 are from the range table (PH 13724) of Maytag Product Help, checked November 2026; no model list is printed.
The range page ties 4d52 to the oven door latch assembly, the door switch or the wiring without saying which has failed.
It is the page's first step and costs nothing. A returning 4d52 afterward means schedule us.
Not from the code alone: the entry lists the oven door latch assembly, the door switch or the wiring and stops.
The model number, what 4d52 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
For 4d51, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.