What it means
4d41 on a range means Maytag suspects the airflow restriction, the oven cooling fan or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Maytag oven 4d41 / Fan and airflow
4d41 on a range means Maytag suspects the airflow restriction, the oven cooling fan or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Also printed as 4d41
4d41 on a range means Maytag suspects the airflow restriction, the oven cooling fan or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Turn the breaker off before you touch anything behind a panel.
4d41 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Match the label on your appliance to the range list before you rely on the wording for 4d41.

Breaker off for one full minute, then back on, and look for 4d41.

Run the oven briefly after the reset and see whether 4d41 comes back.

When 4d41 is on the display of a range, listen for the cooling fan of the range: does it run, run loud, or keep running after the oven is off?
Write down the model and serial numbers and the exact 4d41 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
A Maytag range carries a cooling fan whose job is to protect the oven cavity and electronics from heat during BAKE, BROIL and CLEAN.
Read the definitionMaytag's range page says 4d41 may come from the airflow restriction, the oven cooling fan or the wiring. It stops there; no test and no ranking is given.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether 4d41 returns.
Read the supporting manual4d32 sits beside 4d41 on the range page and names the oven control or the wiring; the code names the airflow restriction, the oven cooling fan or the wiring.
Read the supporting manualLet the range cool fully before another go.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13721 / PH 13721 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14381 / PH 14381 (wall oven)
Scope for 4d41: Maytag range, PH 13721, checked November 2026. Maytag lists no models on the 4d41 page.
Maytag lists the airflow restriction, the oven cooling fan or the wiring. It is a possible-cause list, not a confirmed failure.
It is the page's first step and costs nothing. A returning 4d41 afterward means schedule us.
The list is the airflow restriction, the oven cooling fan or the wiring; testing on site settles it.
The model and serial numbers, the exact display for 4d41, and what the range was doing at the time.
Maytag codes, symptoms, parts and service
4d32 on a range means Maytag suspects the oven control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
A Maytag range carries a cooling fan whose job is to protect the oven cavity and electronics from heat during BAKE, BROIL and CLEAN. Product Help says it can keep spinning for a long while after the oven goes off. A Cooling Fan Speed message means its speed is off.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.