What it means
For 4d31, the Maytag range page points to the oven control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Maytag oven 4d31 / Control board
For 4d31, the Maytag range page points to the oven control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Also printed as 4d31
For 4d31, the Maytag range page points to the oven control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Turn the breaker off before you touch anything behind a panel.
4d31 repeats after the reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Match the label on your appliance to the range list before you rely on the wording for 4d31.

Leave the breaker off a whole minute before checking for 4d31 again.

Once power is back, keep an eye on the oven for about a minute for 4d31.

Note whether the display, keys and lights of the range behave normally, or whether other odd things happen near 4d31.
Note the model and the moment 4d31 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definition4d31 is printed against the oven control or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if 4d31 stays away, the reset did its job.
Read the supporting manualRead the exact display: 4d22 means the airflow restriction, the oven cooling fan or the wiring on the range page, and 4d31 means the oven control or the wiring.
Read the supporting manualThe control runs everything on the range, so a returning 4d31 is a reason to stop using it.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13719 / PH 13719 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14379 / PH 14379 (wall oven)
Scope for 4d31: Maytag range, PH 13719, checked November 2026. Maytag lists no models on the 4d31 page.
The range page ties 4d31 to the oven control or the wiring without saying which has failed.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If 4d31 returns, schedule a visit.
Not from the code alone: the entry lists the oven control or the wiring and stops.
Model and serial numbers plus a note of what happened when 4d31 appeared.
Maytag codes, symptoms, parts and service
4D22 means the cooling fan speed is too low. Maytag names three suspects: an airflow restriction, the oven cooling fan, or the wiring. Check that nothing blocks the vents, then reset the power for one minute.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.