Maytag oven F8E2 / Fan and airflow

Maytag oven
error code F8E2

Oven / display reference

On a range, F8 E2 means the cooling fan speed is too high. Maytag lists the oven cooling fan or the wiring, with no airflow restriction. The wall oven page drops the "too high" label. Reset the breaker for one minute and watch the oven.

Also printed as F8E2

Last reviewed

Oven / display reference
Meaning
On a range, F8 E2 means the cooling fan speed is too high. Maytag lists the oven cooling fan or the wiring, with no airflow restriction. The wall oven page drops the "too high" label. Reset the breaker for one minute and watch the oven.
Who handles it
Reset, then book
Related codes
Source
F8 E2 - Error Code - Range - Product Help | Maytag

What Maytag oven F8E2 means.

What it means

On a range, F8 E2 means the cooling fan speed is too high. Maytag lists the oven cooling fan or the wiring, with no airflow restriction. The wall oven page drops the "too high" label. Reset the breaker for one minute and watch the oven.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

F8 E2 returns after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 4 checks done
  1. Maytag oven F8E2: A hand held near the cooling vent slots above a range oven door, a beige quilted oven mitt hanging on the stainless handle.
    Illustration. Follow your model’s instructions.
    Before you begin

    Note the label on your page

    The range page says "too high." The wall oven page prints no speed, only the fan and the wiring.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Reset the breaker

    Off for one minute, on, then watch the oven for one minute.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Check the fan runs normally

    After the reset, start a bake and listen to the fan.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Compare with F8 E0

    F8 E0 is "too low" and lists an airflow restriction. This entry does not.

Does F8E2 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel
  2. 3Element wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Rear of an electric range with the back panel off, showing a cylindrical blower, a green control board, wiring and an unplugged power cord

Component reference

Range oven cooling fan

A Maytag range carries a cooling fan whose job is to protect the oven cavity and electronics from heat during BAKE, BROIL and CLEAN.

Read the definition

A little more context.

What does F8 E2 mean on a range?

"Cooling fan speed too high. There may be a problem with the Oven Cooling Fan, or the associated wiring."

Read the supporting manual

What does the wall oven page say?

There may be a problem with the Oven Cooling Fan, or the associated wiring. It prints no speed.

Read the supporting manual

Why does an airflow restriction not appear?

Maytag does not say. 4D42 and F8 E0 both list it; F8 E2 does not.

Read the supporting manual

What is the Cooling Fan Speed message?

A separate range page covers "too low or too high" together with an airflow restriction listed.

Read the supporting manual

The manual behind the message.

Manufacturer document

F8 E2 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13797 / PH 13797 (range)

Manufacturer document

F8 E2 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14477 / PH 14477 (wall oven)

Manufacturer document

Cooling Fan Speed - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-07; PH 13889 / PH 13889 (range)

Manufacturer document

F8 E3 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14478 / PH 14478 (wall oven)

Manufacturer document

F8 E0 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13796 / PH 13796 (range)

Product Help range page PH 13797 and wall oven page PH 14477, with PH 14478 (F8 E3), PH 13796 (F8 E0) and the Cooling Fan Speed message PH 13889.

Here to help

Good questions.
Clear answers.

Talk to our team
Is F8 E2 "too high" on a wall oven?

The wall oven page does not say. It names the fan and the wiring.

Does F8 E3 differ from F8 E2?

On the wall oven they print the same sentence.

Should I check for blocked vents?

This page does not list it, but it does no harm to look.

What if it returns?

Book a visit; the fan and its wiring need testing on site.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.