What it means
Maytag lists the airflow restriction, the oven cooling fan or the wiring for Cooling Fan Speed on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Maytag oven Cooling Fan Speed / Fan and airflow
Maytag lists the airflow restriction, the oven cooling fan or the wiring for Cooling Fan Speed on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Also printed as Cooling Fan Speed
Maytag lists the airflow restriction, the oven cooling fan or the wiring for Cooling Fan Speed on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
Cooling Fan Speed repeats after the reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Match the label on your appliance to the range list before you rely on the wording for Cooling Fan Speed.

Cut power at the breaker for a minute, restore it, then check for Cooling Fan Speed.

Once power is back, keep an eye on the oven for about a minute for Cooling Fan Speed.

Leave back panels alone; fan wiring shares the space with live power.
Keep the model number close and note when Cooling Fan Speed appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
A Maytag range carries a cooling fan whose job is to protect the oven cavity and electronics from heat during BAKE, BROIL and CLEAN.
Read the definitionA range showing Cooling Fan Speed is, per Maytag, dealing with a possible problem in the airflow restriction, the oven cooling fan or the wiring. The page adds no diagnosis.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether Cooling Fan Speed comes back.
Read the supporting manualThe range list prints Call Service next to Cooling Fan Speed, but with a different line. Look up the one on your display.
Read the supporting manualLet the range cool fully before another go. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-07; PH 13889 / PH 13889 (range)
Facts for Cooling Fan Speed are from the range table (PH 13889) of Maytag Product Help, checked November 2026; no model list is printed.
The range page ties Cooling Fan Speed to the airflow restriction, the oven cooling fan or the wiring without saying which has failed.
Yes, give it the whole minute. If Cooling Fan Speed is still there afterward, schedule a visit.
The list is the airflow restriction, the oven cooling fan or the wiring; testing on site settles it.
The model number, what Cooling Fan Speed looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
Call Service means the control saw an error. Maytag says to press Cancel first. If the message comes back after Cancel, turn the breaker off for one minute, on again, start a bake cycle and watch the oven for a minute. Book a visit if it returns.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
A Maytag range carries a cooling fan whose job is to protect the oven cavity and electronics from heat during BAKE, BROIL and CLEAN. Product Help says it can keep spinning for a long while after the oven goes off. A Cooling Fan Speed message means its speed is off.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.