Maytag oven F7E6 / Fan and airflow

Maytag oven
error code F7E6

Oven / display reference

The Maytag range entry for F7E6 names the cooling fan or the wiring. Reset first, then call us in if the code keeps coming back.

Also printed as F7E6

Last reviewed

Oven / display reference
Meaning
The Maytag range entry for F7E6 names the cooling fan or the wiring. Reset first, then call us in if the code keeps coming back.
Who handles it
Reset, then book
Related codes
Source
F7 E6 - Error Code - Range - Product Help | Maytag

What Maytag oven F7E6 means.

What it means

The Maytag range entry for F7E6 names the cooling fan or the wiring. Reset first, then call us in if the code keeps coming back.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

F7E6 returns, or the range behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven F7E6: A hand held near the cooling vent slots above a range oven door, a beige quilted oven mitt hanging on the stainless handle.
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Check that your appliance is a range and copy F7E6 exactly as the display shows it.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Cut power at the breaker for a minute, restore it, then check for F7E6.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    See if it returns

    Once power is back, keep an eye on the oven for about a minute for F7E6.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    For F7E6 on this range, listen for the cooling fan of the range: does it run, run loud, or keep running after the oven is off?

  6. Illustration. Follow your model’s instructions.
    Check 6

    Note the model

    Write down the model and serial numbers and the exact F7E6 wording before you call.

Does F7E6 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel
  2. 3Element wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Rear of an electric range with the back panel off, showing a cylindrical blower, a green control board, wiring and an unplugged power cord

Component reference

Range oven cooling fan

A Maytag range carries a cooling fan whose job is to protect the oven cavity and electronics from heat during BAKE, BROIL and CLEAN.

Read the definition

A little more context.

What does Maytag print beside F7E6 for a range?

A range showing F7E6 is, per Maytag, dealing with a possible problem in the cooling fan or the wiring. The page adds no diagnosis.

Read the supporting manual

How should I react the moment F7E6 appears?

Maytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F7E6 returns.

Read the supporting manual

Can I treat F7E5 like F7E6?

F7E5 carries the same parts list as F7E6 on the range page. The reset is the same, only the code differs.

Read the supporting manual

Do I switch the range off when F7E6 comes up?

Short, gentler cooking is the careful choice; stop if the cabinet gets unusually warm. If F7E6 keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

F7 E6 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-01-08; PH 14564 / PH 14564 (range)

F7E6 comes from Maytag Product Help (PH 14564) for the range, read in November 2026; the F7E6 entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
What does F7E6 mean for a range?

Maytag lists the cooling fan or the wiring. It is a possible-cause list, not a confirmed failure.

Will a one-minute breaker reset clear F7E6?

Yes, give it the whole minute. If F7E6 is still there afterward, schedule a visit.

Does F7E6 point to a single part?

The list is the cooling fan or the wiring; testing on site settles it.

What helps most on the first visit for F7E6?

The model number, what F7E6 looked like, and whether the reset changed anything.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.