Maytag oven F7E1 / Door and lid

Maytag oven
error code F7E1

Oven / display reference

F7 E1 depends on the tree. The range page names the door switch or the wiring, and the wall oven page names the water boiler temperature sensor or the wiring. Switch the breaker off for one minute and back on; book a visit if it returns.

Also printed as F7E1

Last reviewed

Oven / display reference
Meaning
F7 E1 depends on the tree. The range page names the door switch or the wiring, and the wall oven page names the water boiler temperature sensor or the wiring. Switch the breaker off for one minute and back on; book a visit if it returns.
Who handles it
Reset, then book
Related codes
Source
F7 E1 - Error Code - Range - Product Help | Maytag

What Maytag oven F7E1 means.

What it means

F7 E1 depends on the tree. The range page names the door switch or the wiring, and the wall oven page names the water boiler temperature sensor or the wiring. Switch the breaker off for one minute and back on; book a visit if it returns.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

The code is back after the one-minute breaker reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 4 checks done
  1. Maytag oven F7E1: Cold open wall oven showing the motorized door latch lever, hook and switch behind the top trim, with the power plug lying unplugged on the floor nearby
    Illustration. Follow your model’s instructions.
    Before you begin

    Check which page matches your oven

    Range: door switch. Wall oven: water boiler temperature sensor.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Reset the breaker

    Switch it off for one minute, then on, and watch the oven for one minute.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    On a range, shut the door fully

    Make sure nothing is caught in the door and it closes evenly, since the page names the door switch.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Note any other message

    Tell us if a water message or another code appeared with it.

Does F7E1 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The door lock.

Conceptual Range / oven sectionDoorLock motor / latchControl123
  1. 1Door

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

How does Maytag's range entry word F7 E1?

There may be a problem with the Door Switch, or the associated wiring. F7 E0 on the range names the latch assembly instead, so Maytag separates the latch from the switch.

Read the supporting manual

Which part does Maytag's wall oven entry name for F7 E1?

There may be a problem with the Water Boiler Temperature Sensor, or the associated wiring. Maytag does not describe the boiler or say what kind of oven has one.

Read the supporting manual

Which other F7 E entries concern water?

On the wall oven tree F7 E0 names the water level, F7 E3 the water filter and F7 E4 the water conductivity sensor. F7 E2 prints no cause.

Read the supporting manual

What should I do when F7 E1 shows?

Reset the power at the breaker for one minute and watch the oven. If F7 E1 returns, book a visit and tell us your model; the page names a part but gives no owner repair.

Read the supporting manual

The manual behind the message.

Manufacturer document

F7 E1 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-01-08; PH 13794 / PH 13794 (range)

Manufacturer document

F7 E1 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14471 / PH 14471 (wall oven)

Manufacturer document

F7 E0 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-01-08; PH 13793 / PH 13793 (range)

Manufacturer document

F7 E0 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14470 / PH 14470 (wall oven)

Manufacturer document

F7 E3 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14473 / PH 14473 (wall oven)

Manufacturer document

F7 E4 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14474 / PH 14474 (wall oven)

Manufacturer document

F7 E2 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14472 / PH 14472 (wall oven)

Product Help range page PH 13794 and wall oven page PH 14471, with PH 13793, 14470, 14472, 14473 and 14474 for the neighbors. The pages list no models.

Here to help

Good questions.
Clear answers.

Talk to our team
Is the door switch the same part as the latch?

Not on the range pages. F7 E0 lists the Oven Door Latch Assembly and F7 E1 lists the Door Switch, so Maytag treats them as two parts.

Does every wall oven have a boiler?

Maytag's page does not say. It names the water boiler temperature sensor only on the wall oven page for F7 E1.

Could the wiring be the cause?

Yes, both pages list the associated wiring next to the named part. A technician tests both on site to see which one it is.

Which page applies to my oven?

A freestanding range follows the range page and a built-in wall oven follows the wall oven page. Your model plate tells us which you have.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.