Maytag oven F7E0 / Door and lid

Maytag oven
error code F7E0

Oven / display reference

F7 E0 means different things on the two trees. The range page names the oven door latch assembly or the wiring. The wall oven page names the water level or the water level sensor, which suggests a model with a water system. Reset the breaker and tell us which oven you have.

Also printed as F7E0

Last reviewed

Oven / display reference
Meaning
F7 E0 means different things on the two trees. The range page names the oven door latch assembly or the wiring. The wall oven page names the water level or the water level sensor, which suggests a model with a water system. Reset the breaker and tell us which oven you have.
Who handles it
Reset, then book
Related codes
Source
F7 E0 - Error Code - Range - Product Help | Maytag

What Maytag oven F7E0 means.

What it means

F7 E0 means different things on the two trees. The range page names the oven door latch assembly or the wiring. The wall oven page names the water level or the water level sensor, which suggests a model with a water system. Reset the breaker and tell us which oven you have.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

F7 E0 returns after the breaker reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 4 checks done
  1. Maytag oven F7E0: Cold open wall oven showing the motorized door latch lever, hook and switch behind the top trim, with the power plug lying unplugged on the floor nearby
    Illustration. Follow your model’s instructions.
    Before you begin

    Check which page matches your oven

    A range follows the door latch wording; a wall oven with a water system follows the water level wording.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Reset the breaker

    Switch it off for one minute, then on, and watch the oven for one minute.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    On a range, close the door fully

    Make sure nothing is caught in the door and it shuts evenly before you rely on the reset.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Write down the display

    Note the exact wording and any water message shown with it.

Does F7E0 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The door lock.

Conceptual Range / oven sectionDoorLock motor / latchControl123
  1. 1Door

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Close view of a metal oven door latch hook mounted with two screws beside the open oven cavity

Component reference

Oven door latch and latch switches (F5)

F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.

Read the definition

A little more context.

What does the range page say about F7 E0?

There may be a problem with the Oven Door Latch Assembly or the associated wiring. Unlike F7 E1 on the range, it does not list the door switch.

Read the supporting manual

What does the wall oven page say?

There may be a problem with the Water Level, Water Level Sensor, or the associated wiring. Maytag does not say what water system the oven has.

Read the supporting manual

How does F7 E1 compare?

On the range F7 E1 names the door switch. On the wall oven it names the water boiler temperature sensor, so both F7 E0 and F7 E1 change meaning between the trees.

Read the supporting manual

What should I do when F7 E0 shows?

Reset the power at the breaker for one minute and watch the oven. If F7 E0 returns, book a visit and tell us your model so we know which page applies.

Read the supporting manual

The manual behind the message.

Manufacturer document

F7 E0 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-01-08; PH 13793 / PH 13793 (range)

Manufacturer document

F7 E0 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14470 / PH 14470 (wall oven)

Manufacturer document

F7 E1 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-01-08; PH 13794 / PH 13794 (range)

Manufacturer document

F7 E1 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14471 / PH 14471 (wall oven)

Product Help range page PH 13793 and wall oven page PH 14470, with PH 13794, 14471 and 14472 for the neighbors. The pages list no models.

Here to help

Good questions.
Clear answers.

Talk to our team
Why would a wall oven have a water level code?

Maytag lists F7 E0, F7 E1, F7 E3 and F7 E4 on the wall oven tree for water level, boiler temperature, water filter and conductivity. The page does not describe the system further.

Is F7 E0 a door latch problem on a wall oven?

Not on the wall oven page, which names the water level and its sensor. The latch wording is on the range page.

Which page applies to my oven?

A freestanding range follows the range page and a built-in wall oven follows the wall oven page. Your model plate tells us which you have.

Does F7 E2 have a page?

On the wall oven tree F7 E2 has a page, but it prints no cause, only the one-minute breaker reset.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.