Model-specific code library

Maytag oven Reset only codes

9 printed codes in this group: 3d31, 3d32, 3d41, F13, F7E2, F8, FBE1, FBE2, FEE8.

A fingertip pressing a touch pad on a range control panel with softly glowing white segments, a striped dish towel hanging over the oven door handle.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Reset only codes

3d31

3D31 is a probe-related entry: Maytag says verify the meat probe is securely inserted in the meat probe receptacle, then reset the power. The page names no failed part. A probe that is pushed in fully, and a breaker reset, are the whole at-home fix.

Reset, then book
3d32

3D32 uses the same Maytag wording as 3D31 and 3D41: verify the meat probe is securely inserted in its receptacle, then reset the power. If the code survives that, no further cause is printed, so book a visit.

Reset, then book
3d41

3D41 carries the same range and wall oven wording as 3D31 and 3D32: verify the meat probe is securely inserted, then reset the power. The wall oven page for F3 E4 adds that a power attachment can cause a probe-type code on some models.

Reset, then book
F13

For a steam oven showing F13, Maytag prints “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Reset, then book
F7E2

F7E2 on a Maytag wall oven is explained as “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Reset, then book
F8

F8 on a Maytag range is explained as “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Try the one-minute breaker reset, and schedule a visit if the code returns.

Reset, then book
FBE1

On a range, the entry for FBE1 says “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Reset, then book
FBE2

The Maytag page for FBE2 on a range states “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Reset, then book
FEE8

For a range showing FEE8, Maytag prints “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Try the one-minute breaker reset, and schedule a visit if the code returns.

Reset, then book

Let’s take care of it.

A full hamper waits for no one.
Book the repair.