What it means
For a steam oven showing F13, Maytag prints “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Maytag oven F13 / Reset only
For a steam oven showing F13, Maytag prints “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Also printed as F13
For a steam oven showing F13, Maytag prints “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Turn the breaker off before you touch anything behind a panel.
F13 repeats after the reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Check that your appliance is a steam oven and copy F13 exactly as the display shows it.

Breaker off for one full minute, then back on, and look for F13.

Give the oven a minute on screen after the reset; a returning F13 means schedule a visit.

Write down the exact words or symbols the steam oven shows before you do anything.
Write down the model and serial numbers and the exact F13 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Maytag's steam oven page gives F13 a single line: “Power unit down by turning off the circuit breaker(s) for one (1) minute.” It adds nothing about cause.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F13 stays away, the reset did its job.
Read the supporting manualDoor in Microwave Display is a separate entry from F13 on the steam oven page, with its own wording.
Read the supporting manualWhether the steam oven is safe depends on how it behaves, not the message alone. Never open a panel on the steam oven yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14530 / PH 14530 (steam oven)
Facts for F13 are from the steam oven table (PH 14530) of Maytag Product Help, checked November 2026; no model list is printed.
The steam oven page reads “Power unit down by turning off the circuit breaker(s) for one (1) minute.” It prints nothing more about cause.
Try it first: one minute off, one minute on screen. If F13 persists, a technician should look.
Maytag names no part here. Read the message and follow the steps.
The model and serial numbers, the exact display for F13, and what the steam oven was doing at the time.
Maytag codes, symptoms, parts and service
On a wall oven, the entry for Door in Microwave Display says “The control is looking for input from the door switches.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.