Model-specific code library
Maytag oven Display and signals codes
6 printed codes in this group: ES, Lo, Lock, Locked, Pre, Sabbath.

Display and signals codes
ES is not an error. Maytag Product Help says the range is in Energy Save mode, a sleep mode that blanks the display after 5 idle minutes. Press any key or open the oven door to wake it. Reset the power only if "ES" will not clear.
Information onlyMaytag's range page words Lo like this: “On some models, once the temperature reaches 170° F, the display will show the temperature and will increase...” Nothing else is printed, so schedule a visit if it repeats.
Information onlyOn a range, the entry for Lock says “The Control Lock avoids unintended use of the surface cooking areas.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Information onlyThe Maytag page for Locked on a range states “The lock feature shuts down the control pads (buttons) and locks the oven door to avoid unintended use of the...” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Information onlyOn a range, the entry for Pre says “On some models, once the temperature reaches 170° F, the display will show the temperature and will increase...” Nothing else is printed, so schedule a visit if it repeats.
Information onlyThe Maytag page for Sabbath on a range states “No tones will sound, and the display(s) will not indicate temperature changes.” No reset is printed for it, so schedule a visit if it keeps appearing.
Owner checks first