Maytag oven Lo / Display and signals

Maytag oven
error code Lo

Oven / display referenceLo

Maytag's range page words Lo like this: “On some models, once the temperature reaches 170° F, the display will show the temperature and will increase...” Nothing else is printed, so schedule a visit if it repeats.

Also printed as Lo

Last reviewed

Oven / display referenceLo
Meaning
Maytag's range page words Lo like this: “On some models, once the temperature reaches 170° F, the display will show the temperature and will increase...” Nothing else is printed, so schedule a visit if it repeats.
Who handles it
Information only
Source
Lo or Pre - Range - Product Help | Maytag

What Maytag oven Lo means.

What it means

Maytag's range page words Lo like this: “On some models, once the temperature reaches 170° F, the display will show the temperature and will increase...” Nothing else is printed, so schedule a visit if it repeats.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

Lo repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven Lo: Wall oven control strip glowing amber segments and two small dots against a dark glass panel, set in oak cabinetry with a laundry room beyond.
    Illustration. Follow your model’s instructions.
    Before you begin

    Before you start

    Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Match the label on your appliance to the range list before you rely on the wording for Lo.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    No reset is printed here; note the behavior of the oven around Lo instead.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Retest briefly

    Note the model and the moment Lo showed up; both help us plan.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Check your manual for how that mode is turned off on your model.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Note the model

    Write down the model and serial numbers and the exact Lo wording before you call.

Does Lo keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel
  2. 3Element wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What should a range owner take from Lo?

The range entry for Lo reads “On some models, once the temperature reaches 170° F, the display will show the temperature and will increase in 5° increments.” That is the whole explanation Maytag prints.

Read the supporting manual

What is worth doing before I schedule a visit for Lo?

No reset is printed for Lo on the range page. Writing down what the oven does around the code is the useful thing to do.

Read the supporting manual

Why do Lo and Locked sit side by side in Maytag's list?

Locked is a neighbor of the code, not a synonym. The reset may overlap; the text does not.

Read the supporting manual

Should the family keep using the range with Lo showing?

Switch the mode off if it is not what you want. If Lo keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

Lo or Pre - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-07; PH 13885 / PH 13885 (range)

Lo comes from Maytag Product Help (PH 13885) for the range, read in November 2026; the Lo entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read Lo on my range?

On the range page the line is “On some models, once the temperature reaches 170° F, the display will show the temperature and will increase in 5° increments.” No further cause is given.

Can I clear Lo myself?

There is no reset on that page. Note what happens and book us if Lo persists.

Does Lo mean something has failed?

Not by itself; the page stops at the line it prints.

What should I have ready when I schedule for Lo?

Model and serial numbers plus a note of what happened when Lo appeared.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.