What it means
On a range, the entry for Lock says “The Control Lock avoids unintended use of the surface cooking areas.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Maytag oven Lock / Display and signals
On a range, the entry for Lock says “The Control Lock avoids unintended use of the surface cooking areas.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Also printed as Lock
On a range, the entry for Lock says “The Control Lock avoids unintended use of the surface cooking areas.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Turn the breaker off before you touch anything behind a panel.
Lock will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Check that your appliance is a range and copy Lock exactly as the display shows it.

Breaker off for one full minute, then back on, and look for Lock.

Run the oven briefly after the reset and see whether Lock comes back.

The control board lives behind panels on the range; keep them closed.
Note the model and the moment Lock showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Lock is covered by this wording on the range page: “The Control Lock avoids unintended use of the surface cooking areas.”
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether Lock returns.
Read the supporting manualIndicator or Hot Light On is a separate entry from Lock on the range page, with its own wording.
Read the supporting manualIf the range behaves after the reset, using it is up to you; if Lock returns, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13661 / PH 13661 (range)
Facts for Lock are from the range table (PH 13661) of Maytag Product Help, checked November 2026; no model list is printed.
If Lock is up on the range, Maytag's wording is “The Control Lock avoids unintended use of the surface cooking areas.” That is the whole entry.
Yes, give it the whole minute. If Lock is still there afterward, schedule a visit.
Not by itself; the page stops at the line it prints.
Model and serial numbers plus a note of what happened when Lock appeared.
Maytag codes, symptoms, parts and service
Maytag's range page words Indicator or Hot Light On like this: “A Cooktop Control is still on or an Element(Burner) is still too hot to touch safely.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.