What it means
The Maytag page for Sabbath on a range states “No tones will sound, and the display(s) will not indicate temperature changes.” No reset is printed for it, so schedule a visit if it keeps appearing.
Maytag oven Sabbath / Display and signals
The Maytag page for Sabbath on a range states “No tones will sound, and the display(s) will not indicate temperature changes.” No reset is printed for it, so schedule a visit if it keeps appearing.
Also printed as Sabbath
The Maytag page for Sabbath on a range states “No tones will sound, and the display(s) will not indicate temperature changes.” No reset is printed for it, so schedule a visit if it keeps appearing.
Turn the breaker off before you touch anything behind a panel.
Sabbath returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Record Sabbath character by character and note the product type: range.

No reset is printed here; note the behavior of the oven around Sabbath instead.

Keep the model number close and note when Sabbath appeared and what the range was doing.

Ask whether Sabbath is a mode someone switched on; Maytag describes it as a setting.
Keep the model number close and note when Sabbath appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The range entry for Sabbath reads “No tones will sound, and the display(s) will not indicate temperature changes.” That is the whole explanation Maytag prints.
Read the supporting manualMaytag's page for Sabbath gives no reset or checking steps, so there is no page-approved first move beyond noting exactly what the oven shows.
Read the supporting manualLock is a neighbor of Sabbath, not a synonym. The reset may overlap; the text does not.
Read the supporting manualNothing is wrong when Sabbath is a mode message. If the code keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-06-02; PH 13662 / PH 13662 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-06-02; PH 13663 / PH 13663 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14351 / PH 14351 (wall oven)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-06-02; PH 14352 / PH 14352 (wall oven)
Sabbath comes from Maytag Product Help (PH 13662) for the range, read in November 2026; the Sabbath entry names no models.
The range page reads “No tones will sound, and the display(s) will not indicate temperature changes.” It prints nothing more about cause.
There is no reset on that page. Note what happens and book us if Sabbath persists.
Nothing about replacing parts is printed for Sabbath.
The model number, what Sabbath looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
On a range, the entry for Lock says “The Control Lock avoids unintended use of the surface cooking areas.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.