What it means
On a range, the entry for FBE1 says “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Maytag oven FBE1 / Reset only
On a range, the entry for FBE1 says “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Also printed as FBE1
On a range, the entry for FBE1 says “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
FBE1 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record FBE1 character by character and note the product type: range.

Cut power at the breaker for a minute, restore it, then check for FBE1.

Run the oven briefly after the reset and see whether FBE1 comes back.

Check your model manual for what FBE1 means before treating it as a breakdown.
Write down the model and serial numbers and the exact FBE1 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
FBE1 is covered by this wording on the range page: “Power unit down by turning off the circuit breaker(s) for one (1) minute.”
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if FBE1 stays away, the reset did its job.
Read the supporting manualThe range list prints Sabbath next to FBE1, but with a different line. Look up the one on your display.
Read the supporting manualWhen in doubt, switch the range off.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-03-17; PH 14682 / PH 14682 (range)
FBE1 comes from Maytag Product Help (PH 14682) for the range, read in November 2026; the FBE1 entry names no models.
The range page reads “Power unit down by turning off the circuit breaker(s) for one (1) minute.” It prints nothing more about cause.
It is the page's first step and costs nothing. A returning FBE1 afterward means schedule us.
Not by itself; the page stops at the line it prints.
Model and serial numbers plus a note of what happened when FBE1 appeared.
Maytag codes, symptoms, parts and service
The Maytag page for Sabbath on a range states “No tones will sound, and the display(s) will not indicate temperature changes.” No reset is printed for it, so schedule a visit if it keeps appearing.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.