Maytag oven FBE2 / Reset only

Maytag oven
error code FBE2

Oven / display referenceFBE2

The Maytag page for FBE2 on a range states “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Also printed as FBE2

Last reviewed

Oven / display referenceFBE2
Meaning
The Maytag page for FBE2 on a range states “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Who handles it
Reset, then book
Related codes
Source
FBE2 - Error Code - Range - Product Help | Maytag

What Maytag oven FBE2 means.

What it means

The Maytag page for FBE2 on a range states “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

What you can safely check

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

When to call a technician

FBE2 will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven FBE2: A fingertip pressing a touch pad on a range control panel with softly glowing white segments, a striped dish towel hanging over the oven door handle.
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Record FBE2 character by character and note the product type: range.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Leave the breaker off a whole minute before checking for FBE2 again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Run the oven briefly after the reset and see whether FBE2 comes back.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Note when FBE2 appears: at start, mid-cycle or after a power cut.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Have this ready

    Keep the model number close and note when FBE2 appeared and what the range was doing.

Does FBE2 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel
  2. 3Element wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does Maytag print beside FBE2 for a range?

The range entry for FBE2 reads “Power unit down by turning off the circuit breaker(s) for one (1) minute.” That is the whole explanation Maytag prints.

Read the supporting manual

How should I react the moment FBE2 appears?

Turn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether FBE2 comes back.

Read the supporting manual

Can I treat FBE1 like FBE2?

The range list prints FBE1 next to FBE2, but with a different line. Look up the one on your display.

Read the supporting manual

Is the range fine to use with FBE2 on the display?

Whether the range is safe depends on how it behaves, not the message alone. Never open a panel on the range yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

FBE2 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-03-17; PH 14681 / PH 14681 (range)

FBE2 comes from Maytag Product Help (PH 14681) for the range, read in November 2026; the FBE2 entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
What is FBE2 on a Maytag range?

Maytag's wording is “Power unit down by turning off the circuit breaker(s) for one (1) minute.” That is the whole entry.

Will a one-minute breaker reset clear FBE2?

Try it first: one minute off, one minute on screen. If FBE2 persists, a technician should look.

Does the range page name a part for FBE2?

Nothing about replacing parts is printed for FBE2.

What should I have ready when I schedule for FBE2?

Model and serial numbers plus a note of what happened when FBE2 appeared.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.