Maytag oven FEE6 / Heating

Maytag oven
error code FEE6

Oven / display reference

For FEE6, the Maytag range page points to the main cavity bake element or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Also printed as FEE6

Last reviewed

Oven / display reference
Meaning
For FEE6, the Maytag range page points to the main cavity bake element or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Who handles it
Reset, then book
Related codes
Source
FEE6 - Error Code - Range - Product Help | Maytag

What Maytag oven FEE6 means.

What it means

For FEE6, the Maytag range page points to the main cavity bake element or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

FEE6 will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven FEE6: Empty range oven with the door open, the bake element on the floor and the broil element at the top both visible, racks removed.
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Record FEE6 character by character and note the product type: range.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    Breaker off for one full minute, then back on, and look for FEE6.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    See if it returns

    Once power is back, keep an eye on the oven for about a minute for FEE6.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Do not lift or force a surface element; its connections are live under the glass.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Write down the model and serial numbers and the exact FEE6 wording before you call.

Does FEE6 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Bake and broil heat.

Conceptual Range / oven sectionBake element / burnerBroil elementGas igniterControl1234
  1. 1Bake element / burner
  2. 3Gas igniter

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Open oven cavity with the bake element on the floor and the broil element on the roof both glowing orange

Component reference

Range bake and broil elements

A Maytag electric range pulses its bake and broil elements as part of normal operation.

Read the definition

A little more context.

Which entry in Maytag's range list covers FEE6?

For FEE6 the range entry names the main cavity bake element or the wiring. Nothing in it says which of them has failed.

Read the supporting manual

How do I handle FEE6 on the range step by step?

Take the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if FEE6 stays away, the reset did its job.

Read the supporting manual

What separates FEE6 from FBE2?

FBE2 is a neighbor of FEE6, not a synonym. The reset may overlap; the text does not.

Read the supporting manual

Is the range fine to use with FEE6 on the display?

Use only the cooking areas that behave and leave the named one alone. Never open a panel on the range yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

FEE6 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-01-08; PH 14567 / PH 14567 (range)

Facts for FEE6 are from the range table (PH 14567) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
What is FEE6 on a Maytag range?

FEE6 is printed against the main cavity bake element or the wiring; the page does not narrow it down.

Can a breaker reset fix FEE6?

Yes, give it the whole minute. If FEE6 is still there afterward, schedule a visit.

Does FEE6 point to a single part?

Maytag names the main cavity bake element or the wiring. Which one failed is for a technician with a meter to decide.

What do you need to know about FEE6?

Model and serial numbers plus a note of what happened when FEE6 appeared.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.