Maytag oven FEE7 / Heating

Maytag oven
error code FEE7

Oven / display reference

Maytag's range page links FEE7 to the main cavity broil element or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

Also printed as FEE7

Last reviewed

Oven / display reference
Meaning
Maytag's range page links FEE7 to the main cavity broil element or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Who handles it
Reset, then book
Related codes
Source
FEE7 - Error Code - Range - Product Help | Maytag

What Maytag oven FEE7 means.

What it means

Maytag's range page links FEE7 to the main cavity broil element or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

What you can safely check

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

When to call a technician

FEE7 repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven FEE7: Empty range oven with the door open, the bake element on the floor and the broil element at the top both visible, racks removed.
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check what you see

    Check that your appliance is a range and copy FEE7 exactly as the display shows it.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    Cut power at the breaker for a minute, restore it, then check for FEE7.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Run the oven briefly after the reset and see whether FEE7 comes back.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Make sure pans sit flat and centered on the range.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Have this ready

    Note the model and the moment FEE7 showed up; both help us plan.

Does FEE7 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Bake and broil heat.

Conceptual Range / oven sectionBake element / burnerBroil elementGas igniterControl1234
  1. 1Bake element / burner
  2. 3Gas igniter

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Open oven cavity with the bake element on the floor and the broil element on the roof both glowing orange

Component reference

Range bake and broil elements

A Maytag electric range pulses its bake and broil elements as part of normal operation.

Read the definition

A little more context.

How does the Maytag range page explain FEE7?

Maytag's range page says FEE7 may come from the main cavity broil element or the wiring. It stops there; no test and no ranking is given.

Read the supporting manual

How should I react the moment FEE7 appears?

Take the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if FEE7 stays away, the reset did its job.

Read the supporting manual

How far apart are FEE7 and FEE6?

Maytag lists the main cavity bake element or the wiring against FEE6, while FEE7 gets the main cavity broil element or the wiring. They are neighbors in the range list but separate entries.

Read the supporting manual

How careful should I be with the range while FEE7 is up?

If an area stays on by itself, switch the range off at the breaker.

Read the supporting manual

The manual behind the message.

Manufacturer document

FEE7 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-01-08; PH 14568 / PH 14568 (range)

Scope for FEE7: Maytag range, PH 14568, checked November 2026. Maytag lists no models on the FEE7 page.

Here to help

Good questions.
Clear answers.

Talk to our team
What does Maytag say FEE7 means?

Maytag names the main cavity broil element or the wiring and gives no test to choose between them.

Is switching off the breaker enough for FEE7?

It is the page's first step and costs nothing. A returning FEE7 afterward means schedule us.

Does FEE7 point to a single part?

No. the main cavity broil element or the wiring are all candidates and the page gives no way to choose.

What should I tell the technician about FEE7?

The model number, what FEE7 looked like, and whether the reset changed anything.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.