Maytag oven 3d41 / Reset only

Maytag oven
error code 3d41

Oven / display reference3d41

3D41 carries the same range and wall oven wording as 3D31 and 3D32: verify the meat probe is securely inserted, then reset the power. The wall oven page for F3 E4 adds that a power attachment can cause a probe-type code on some models.

Also printed as 3d41

Last reviewed

Oven / display reference3d41
Meaning
3D41 carries the same range and wall oven wording as 3D31 and 3D32: verify the meat probe is securely inserted, then reset the power. The wall oven page for F3 E4 adds that a power attachment can cause a probe-type code on some models.
Who handles it
Reset, then book
Related codes
Source
3d41- Error Code - Range - Product Help | Maytag

What Maytag oven 3d41 means.

What it means

3D41 carries the same range and wall oven wording as 3D31 and 3D32: verify the meat probe is securely inserted, then reset the power. The wall oven page for F3 E4 adds that a power attachment can cause a probe-type code on some models.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

3D41 returns after the probe and rack checks and the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 4 checks done
  1. Maytag oven 3d41: A fingertip pressing a touch pad on a range control panel with softly glowing white segments, a striped dish towel hanging over the oven door handle.
    Illustration. Follow your model’s instructions.
    Before you begin

    Check the probe jack

    Make sure the meat probe is seated. Its location may vary.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check a power attachment if you have one

    The wall oven F3 E4 page says a roll-out rack power attachment can come unplugged on some models.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Reset the breaker

    One minute off, then on, then monitor the oven for one minute.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Record whether it recurs

    A code that comes back after the checks is the one to report.

Does 3d41 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel
  2. 3Element wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does 3D41 say?

Verify meat probe is securely inserted in the meat probe receptacle. Location may vary. That is the whole cause line on the range page.

Read the supporting manual

What about the power attachment?

On some models the roll-out rack carries a power attachment. If it was in use when the code showed, it may have become unplugged.

Read the supporting manual

What if neither is the cause?

Then the reset is the last at-home step. A code that survives it needs a technician.

Read the supporting manual

The manual behind the message.

Manufacturer document

3d41- Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13713 / PH 13713 (range)

Manufacturer document

3d41 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14373 / PH 14373 (wall oven)

Manufacturer document

F3 E4 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13778 / PH 13778 (range)

Manufacturer document

F3 E4 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-06-02; PH 14430 / PH 14430 (wall oven)

Product Help range page PH 13713 and wall oven page PH 14373, plus the F3 E4 pages (PH 13778 range, PH 14430 wall oven) for the power attachment wording. No models are listed.

Here to help

Good questions.
Clear answers.

Talk to our team
Is 3D41 an F3 E4 code?

They are separate pages. The wall oven F3 E4 page is longer and mentions power attachments.

What is a power attachment?

Maytag says it is available on some models and is plugged in at the roll-out rack. The page does not describe it further.

How do I know the rack is seated?

Maytag says a tone will sound when the rack is in place on the wall oven F3 E4 page.

Does 3D41 name a part?

No. It names the probe receptacle step and the reset.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.