What it means
F3E9 on a wall oven means Maytag suspects the lower oven temperature sensor, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Maytag oven F3E9 / Sensors
F3E9 on a wall oven means Maytag suspects the lower oven temperature sensor, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Also printed as F3E9
F3E9 on a wall oven means Maytag suspects the lower oven temperature sensor, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Turn the breaker off before you touch anything behind a panel.
F3E9 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Check that your appliance is a wall oven and copy F3E9 exactly as the display shows it.

Cut power at the breaker for a minute, restore it, then check for F3E9.

Once power is back, keep an eye on the oven for about a minute for F3E9.

Do not bend or poke the sensor inside the wall oven; panel work belongs to a technician.
Write down the model and serial numbers and the exact F3E9 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue.
Read the definitionF3E9 is printed against the lower oven temperature sensor, the control or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether F3E9 comes back.
Read the supporting manualF3E8 and F3E9 name the same suspects in the wall oven list; quote the code you actually see when booking.
Read the supporting manualDo not rely on the dial alone while this is open; a food thermometer is the safer guide. Never open a panel on the wall oven yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14435 / PH 14435 (wall oven)
Scope for F3E9: Maytag wall oven, PH 14435, checked November 2026. Maytag lists no models on the F3E9 page.
F3E9 is printed against the lower oven temperature sensor, the control or the wiring; the page does not narrow it down.
It is the page's first step and costs nothing. A returning F3E9 afterward means schedule us.
The list is the lower oven temperature sensor, the control or the wiring; testing on site settles it.
Tell us the model, the display wording and when F3E9 first showed up.
Maytag codes, symptoms, parts and service
For F3E8, the Maytag wall oven page points to the lower oven temperature sensor, the control or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
On a Maytag range or wall oven, F1-1, F1-2 and F2 all carry the same wording in Product Help: the sensor in the oven, the control or the wiring could be at issue. The only home step the pages print is a short breaker reset, and they name no other check.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.