Maytag oven F1E6 / Sensors

Maytag oven
error code F1E6

Oven / display reference

F1 E6 appears only on Maytag's wall oven pages, where it names the microwave thermistor or sensor, or the wiring. Maytag has no range page for it. Switch the breaker off for one minute and back on, then watch the oven; book a visit if F1 E6 returns.

Also printed as F1E6

Last reviewed

Oven / display reference
Meaning
F1 E6 appears only on Maytag's wall oven pages, where it names the microwave thermistor or sensor, or the wiring. Maytag has no range page for it. Switch the breaker off for one minute and back on, then watch the oven; book a visit if F1 E6 returns.
Who handles it
Reset, then book
Related codes
Source
F1 E6 - Wall Oven - Product Help | Maytag

What Maytag oven F1E6 means.

What it means

F1 E6 appears only on Maytag's wall oven pages, where it names the microwave thermistor or sensor, or the wiring. Maytag has no range page for it. Switch the breaker off for one minute and back on, then watch the oven; book a visit if F1 E6 returns.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

F1 E6 returns after the breaker reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 4 checks done
  1. Maytag oven F1E6: Close view of a cold oven's rear wall with the slim temperature probe mounted on a small bracket, the racks removed and the door open below.
    Illustration. Follow your model’s instructions.
    Before you begin

    Confirm your oven has a microwave

    F1 E6 sits with the microwave entries of a combination wall oven, so it applies only if your stack includes a microwave.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Reset the breaker

    Switch the breaker off for one minute, then on, and watch the oven for one minute to see whether the code displays again.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Check for related F-codes

    If F1 E5 or F4 E2 also appeared, mention them when you book; they name other microwave parts.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Leave the cabinet closed

    The sensor and its wiring are inside the microwave section, so a technician should test them.

Does F1E6 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The oven temperature sensor.

Conceptual Range / oven sectionTemperature sensorWiringControl123

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does F1 E6 mean on a wall oven?

Maytag's page says there may be a problem with the Microwave Thermistor or Sensor, or the associated wiring. It does not say which one, and it gives no range version of this code.

Read the supporting manual

How does F1 E6 differ from its neighbors?

F1 E5 on the same tree names the Microwave Inverter and Magnetron Tube, and F1 E4 names the Microwave Appliance Manager or Microwave Power Relay. F1 E6 is the entry about a sensor.

Read the supporting manual

Is there another microwave sensor code?

Yes. F4 E2 names the Microwave Sensor/Thermistor together with the Microwave Appliance Manager, so it is the closest relative of F1 E6.

Read the supporting manual

What should I do when F1 E6 shows?

Reset the power at the breaker for one minute and watch the oven. If F1 E6 returns, book a visit; Maytag lists the sensor and wiring as possible problems and gives no owner fix.

Read the supporting manual

The manual behind the message.

Manufacturer document

F1 E6 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14412 / PH 14412 (wall oven)

Manufacturer document

F1 E5 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14411 / PH 14411 (wall oven)

Manufacturer document

F1 E4 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14410 / PH 14410 (wall oven)

Manufacturer document

F4 E2 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14440 / PH 14440 (wall oven)

Wall oven page PH 14412 only; Maytag has no range page for F1 E6. PH 14410, 14411 and 14440 give the neighbors. The pages list no models.

Here to help

Good questions.
Clear answers.

Talk to our team
Does my range have an F1 E6 code?

Maytag publishes F1 E6 only for wall ovens. If you have a freestanding range, read the range entries for the code you see instead, and tell us the exact wording.

Is F1 E6 about the oven temperature sensor?

No. The page names the microwave thermistor or sensor. The oven temperature sensor codes are the F3 E entries, which are separate pages.

What does the breaker reset do?

It cuts power to the control for one minute so it can restart. Maytag asks you to watch the oven for one more minute to see whether the code returns.

Will you replace the sensor?

We test the microwave section on site and tell you what we find. Maytag lists the sensor or the wiring as possible problems, so the test decides which it is.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.