Maytag oven F1E4 / Power supply

Maytag oven
error code F1E4

Oven / display reference

Maytag lists the microwave appliance manager, the microwave power relay or the wiring for F1E4 on the wall oven. Reset the power first and watch the display; a returning the code is the cue to book us.

Also printed as F1E4

Last reviewed

Oven / display reference
Meaning
Maytag lists the microwave appliance manager, the microwave power relay or the wiring for F1E4 on the wall oven. Reset the power first and watch the display; a returning the code is the cue to book us.
Who handles it
Reset, then book
Related codes
Source
F1 E4 - Wall Oven - Product Help | Maytag

What Maytag oven F1E4 means.

What it means

Maytag lists the microwave appliance manager, the microwave power relay or the wiring for F1E4 on the wall oven. Reset the power first and watch the display; a returning the code is the cue to book us.

What you can safely check

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

When to call a technician

F1E4 returns, or the wall oven behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven F1E4: Back of a pulled-out range with the terminal block cover off beside it, the black power cord with a four-prong plug lying on the floor next to a flashlight.
    Illustration. Follow your model’s instructions.
    Before you begin

    Before you start

    Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Match the label on your appliance to the wall oven list before you rely on the wording for F1E4.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    Breaker off for one full minute, then back on, and look for F1E4.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Retest briefly

    Give the oven a minute on screen after the reset; a returning F1E4 means schedule a visit.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Never open the casing; microwave parts hold charge.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Keep the model number close and note when F1E4 appeared and what the wall oven was doing.

Does F1E4 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

Which entry in Maytag's wall oven list covers F1E4?

F1E4 is printed against the microwave appliance manager, the microwave power relay or the wiring. Maytag words it as a possible problem, not a finding.

Read the supporting manual

How do I handle F1E4 on the wall oven step by step?

Take the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F1E4 stays away, the reset did its job.

Read the supporting manual

What separates F1E4 from F1E3?

Read the exact display: F1E3 means the microwave appliance manager or the wiring on the wall oven page, and F1E4 means the microwave appliance manager, the microwave power relay or the wiring.

Read the supporting manual

How careful should I be with the wall oven while F1E4 is up?

Stop at once if the wall oven sparks, hums loudly or smells burnt. Never open a panel on the wall oven yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

F1 E4 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14410 / PH 14410 (wall oven)

Facts for F1E4 are from the wall oven table (PH 14410) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read F1E4 on my wall oven?

F1E4 is printed against the microwave appliance manager, the microwave power relay or the wiring; the page does not narrow it down.

Is switching off the breaker enough for F1E4?

Try it first: one minute off, one minute on screen. If F1E4 persists, a technician should look.

Does F1E4 point to a single part?

The list is the microwave appliance manager, the microwave power relay or the wiring; testing on site settles it.

What do you need to know about F1E4?

The model and serial numbers, the exact display for F1E4, and what the wall oven was doing at the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.