Maytag oven F1E3 / Control board

Maytag oven
error code F1E3

Oven / display reference

F1E3 on a wall oven means Maytag suspects the microwave appliance manager or the wiring. Begin with the reset; if the code is back afterward, book a technician.

Also printed as F1E3

Last reviewed

Oven / display reference
Meaning
F1E3 on a wall oven means Maytag suspects the microwave appliance manager or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Who handles it
Reset, then book
Related codes
Source
F1 E3 - Wall Oven - Product Help | Maytag

What Maytag oven F1E3 means.

What it means

F1E3 on a wall oven means Maytag suspects the microwave appliance manager or the wiring. Begin with the reset; if the code is back afterward, book a technician.

What you can safely check

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

When to call a technician

F1E3 repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven F1E3: Wall oven with its top trim removed showing the green control board and fanned wire connectors, the black power cord and plug lying unplugged on the floor
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Check that your appliance is a wall oven and copy F1E3 exactly as the display shows it.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Run the reset

    Breaker off for one full minute, then back on, and look for F1E3.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Retest briefly

    Give the oven a minute on screen after the reset; a returning F1E3 means schedule a visit.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Heat a cup of water in the wall oven and see whether it warms normally.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Note the model and the moment F1E3 showed up; both help us plan.

Does F1E3 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What is Maytag saying with F1E3 on your wall oven?

F1E3 is printed against the microwave appliance manager or the wiring. Maytag words it as a possible problem, not a finding.

Read the supporting manual

What is worth doing before I schedule a visit for F1E3?

Maytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F1E3 returns.

Read the supporting manual

Can I treat F1E9 like F1E3?

Maytag lists the appliance control board or the wiring against F1E9, while F1E3 gets the microwave appliance manager or the wiring. They are neighbors in the wall oven list but separate entries.

Read the supporting manual

Is the wall oven fine to use with F1E3 on the display?

Do not run the wall oven empty while testing. Never open a panel on the wall oven yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

F1 E3 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14409 / PH 14409 (wall oven)

Scope for F1E3: Maytag wall oven, PH 14409, checked November 2026. Maytag lists no models on the F1E3 page.

Here to help

Good questions.
Clear answers.

Talk to our team
What is F1E3 on a Maytag wall oven?

The wall oven page ties F1E3 to the microwave appliance manager or the wiring without saying which has failed.

Should I reset the power for F1E3?

It is the page's first step and costs nothing. A returning F1E3 afterward means schedule us.

Which parts does Maytag blame for F1E3?

The list is the microwave appliance manager or the wiring; testing on site settles it.

What do you need to know about F1E3?

Tell us the model, the display wording and when F1E3 first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.