What it means
F1 E9 gives the Appliance Control Board or the wiring as the possible problem, on both the range and wall oven pages. The page offers one at-home step: breaker off for one minute, back on, and watch the oven for one minute.
Maytag oven F1E9 / Control board
F1 E9 gives the Appliance Control Board or the wiring as the possible problem, on both the range and wall oven pages. The page offers one at-home step: breaker off for one minute, back on, and watch the oven for one minute.
Also printed as F1E9
F1 E9 gives the Appliance Control Board or the wiring as the possible problem, on both the range and wall oven pages. The page offers one at-home step: breaker off for one minute, back on, and watch the oven for one minute.
Turn the breaker off before you touch anything behind a panel.
F1 E9 comes back after the reset.
Your Maytag to-do list, saved here on this device

Breaker off one minute, on, monitor one minute.

Wall ovens and ranges are listed in separate trees, so we need to know which you have.

Light, clock and bake: note which still work.

The page names a board and its wiring; both are behind the panel.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionThere may be a problem with the Appliance Control Board, or the associated wiring.
Read the supporting manualNot in the printed text. F1 E7 uses the same sentence on both trees.
Read the supporting manualAfter F1 E7 and F1 E6. F1 E6 is a wall oven microwave thermistor entry, so only the E7 and E9 pair name the board.
Read the supporting manualIf F1 E9 returns, or the oven control behaves oddly.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13763 / PH 13763 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14414 / PH 14414 (wall oven)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13762 / PH 13762 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14413 / PH 14413 (wall oven)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14412 / PH 14412 (wall oven)
Product Help range page PH 13763 and wall oven page PH 14414, with PH 13762 and PH 14413 for F1 E7.
Maytag only says there may be a problem with it.
It removes power from the control for a minute so it can restart.
Yes, with identical text.
Maytag still asks you to monitor it for a minute after the reset.
Maytag codes, symptoms, parts and service
F1 E7 names the Appliance Control Board or its wiring, and Maytag prints the same sentence for ranges and wall ovens. Reset the breaker for one minute and watch the oven for one more. A board is not an owner repair, so book a visit if it returns.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.